Warming of the balcony with his hands - all the secrets from the insulation to the finish

Warming of the balcony with his hands - how to choose the best solution?

Many advise to do the balcony insulation foam blocks.But this is a very expensive way, and to resort to it only be in cases where other options are unacceptable.With what should begin equipping the new room?Of course, with the installation of windows.

To not bore you with long explanations, in brief we can say that the best choice is today considered the PVC profile with double glazing.After installing windows must be repaired using a sealant all the gaps left between the floor and walls.

Then the remaining space should be filled with foam.Unfortunately, in the majority of high-rise buildings do not always have the opportunity to warming of the balcony outside.And so many apartment owners isolate them from the inside only.

Warming of the balcony - manual isolation bookmark

But if you conduct internal insulation without complying with certain rules, this could lead to the fact that in the winter under the windows of the balcony on the floor will start to appear puddles.The fact is that without proper insulation within heater condensate begins to accumulate, and this in turn leads to a significant reduction in its heat-qualities.

To this did not happen, everyone who makes insulation balcony, guide advises to install a layer of insulation vapor barrier.With this function successfully manage an ordinary plastic film or aluminum foil.One disadvantage of this method is considered to lack of breathability structure.In other words, the wall simply ceases to "breathe."

In order to prevent the accumulation of moisture, can also be made with polystyrene foam insulation balcony.This material, which differs excellent insulating properties, high strength and sufficiently low hygroscopicity.

Thermal insulation foam balconies with their hands will increase the insulation life of up to 40 years.This material is considered to be by far the most popular and simple enough to use, but, unfortunately, fit only for the minimum insulation because of its high thermal insulation qualities enough.

foam insulated balcony - complete the operation finishes competent

After installing the insulation material is carried out laying the second layer of polyethylene, which in the future will serve not only as paroizolyator, but also as an additional insulation.It should be remembered that the quality of the performance vapor barrier depend directly.

When insulation is ready you can start finishing.For this purpose, a layer of insulating material are set 03/02 pine timber section of 5 cm. The distance between them should be within half a meter.Subsequently, they nailed stable planks thickness of 30 to 50 mm.Walls

best sheathing wooden paneling.Also it fits well and drywall, which can be painted or wallpapered.Some owners use for this purpose PVC panels.For mounting batten using dowels and screws, which performed its mounting on a concrete wall.Do not forget to check the level of the position of the building boards.

If you plan to bring to the balcony wiring, should take care of this in advance and prepare for the relevant materials.All wires must be carefully put under the finish trim.This warming process can be considered complete, and for greater clarity on how the balcony is warming his hands, the video is at the end of this article and is ready to answer the remaining questions.