Sticking wallpaper directly on the lime : it is possible!

assess the state of the walls whitewashed

The first thing to do - is to carefully inspect the walls and floors.

Firstly, as a thick layer of lime sprayed on the original foundation.If the layer is uniform, not too thick, is firmly on the walls, there is a chance not to resort to whitewash remover.

Second, assess the state of the walls themselves.Are they equal?Firmly holds whether putty and plaster?Do not sand or clay strewed?I do not place finishes swollen?If problems are present, try to keep the limestone layer at least short-sighted, because, like it or not, have to deal with more serious problems.In this case the plaster obbivat wholly or partly and is produced again.If some parts of the walls remained intact, with them we will have to completely wash whitewash before further finishing.

Assessing selected wallpaper

whitewash structure is a set of tiny particles of lime, which is not actually attached to each other.That is why they are so easy to pass on items that come into contact with the walls.This explains the fact that you need to very carefully choose the wallpaper, which are supposed to be glued on the whitewash.

If you purchased a thin lightweight paper wallpaper, when the rest of favorable conditions, there is a chance of successfully pasting the walls with lime.If you choose vinyl, cork, bamboo, fabric and other heavy varieties of wallpaper, do not even try to glue them on top of whitewash.Whatever you do, make a new coating to stick to the walls, you can not.

Alternative - liquid wallpaper.At a certain surface treatment whitewashed walls, this option will be the most simple and affordable, with the exception of their high cost.

As pokleit wallpaper in the lime?

If the layer of whitewash thin and uniform, smooth and sturdy walls and wallpaper light thin paper or liquid, that is, all the conditions are favorable for glueing, should make the preparation procedures.Loose structure of lime needed to seal, so that it can serve as a reliable support for the finish.

There are two ways to implement these preparatory works: modern and grandfather, and what to choose up to you.

modern way to glue wallpaper directly to whitewash

Today in DIY stores can buy a special primer for whitewash and loose surfaces.Stock up on a big soft brush and apply three coats of this primer the entire surface of the wall, making sure to completely whitewash soaked to the very foundation.Moreover, each subsequent coat is applied only after the previous dry (from 3 hours to dry summer nights during the wet season).

Wallpaper glue can only be after the final drying of the walls, that is a day or three.

antiquated method of wallpapering on lime

By the same token, you can seal the whitewash and without going to the store.With the same objective cope and the usual, familiar to everyone, paste.The main thing is to cook it is not too thick, so that it quickly permeated all layers of whitewash, and be sure to drain from the lumps.

paste dries long coats, so drying wait time walls may take up to a week.Wallpaper glue can also be only after the complete drying of the substrate.

If the wallpaper you selected does not differ light weight, the walls do not meet the requirements, whitewash too big layer or it peels, or you just do not want to risk the repair - it is better to remove the whitewash one of the tried and tested for years way.Read about how to remove the whitewash quickly and cleanly, you will be able on our website.