Build Daily

Building Materials

August 12, 2017 18:08

How to choose the optimal composition of the adhesive for the tiles ?

click fraud protection

types of tiles and adhesive features for them

Dry mixes - this is the material that is needed to carry out any repairs.Each type of coating, presented in our market, has its own chemical and technical properties, which manifests itself in the ways of laying, the scope and features of operation.Thus, the ceramic tile has a different purpose and methods of installation.It is therefore logical that for each type of tile used some type of glue.

  • Porcelain tiles - he has a low degree of water absorption, and it is unaffected by changes in temperature, so the adhesive mixture should be supple for him;
  • Clinker - has similar properties to granite.If this type of tiles used for lining furnaces and fireplaces, the adhesive composition must include kaolin clay and fireclay.The same mixture can be used for underfloor heating;
  • Tiles made of white or red clay - it can be used for ordinary cement based;
  • large and heavy tile - this coating is placed adhesive containing reinforced crumb that will prevent it from slipping from the surface;
  • Floor tiles - requires elastic composition due to large loads.

These are the main types of tiles and the adhesive composition especially for them.Knowing what type of coverage you will use and on which surface you can decide on what glue to glue the tiles.You must take this with full responsibility, because a wrong choice will make all your efforts in vain: the coating starts to peel off, break down and will not serve the term that should be.

Important!To determine the type of structure, with no experience in his choice, the best decision would be to consult with a specialist in this field.

Getting Started

work should not start until the stock will not be all the necessary materials.Also collect all the tools that will be needed in the process.At hand should always be a sponge and a bucket of water in which you can quickly wash the instrument and collect spilled liquid.All the places that require protection (furniture, decoration elements) cover newspapers, a tarp or a protective film.adhesive tape can be used for its fastening.But do not overdo it, because then together with it can be torn off and pieces of wallpaper, paint and finishes.

Plan the progress of the work to the end, you were at the door, and not in the corner of the room.However, there are times when you need to move around the freshly laid tiles.For those cases in advance prepare plywood pieces not less than 20 millimeters thick to use it as a track.After a walk along this path, lift each sheet of plywood and check for tile moved.

Adhesive materials for laying tiles for each type of coverage has its own estimates of the number.Thus, the porous surface of the cement absorbs more glue than the concrete slab, and the porous unglazed plate more than glazed.In hot weather, there is a strong evaporation of the liquid from the adhesive composition, so you need to apply it more than would be required under normal temperature.Due to the influence of many factors, not possible to make any number table glue of calculations.

Important!To calculate the exact amount of the mixture, carefully read the product instructions.

mixture for laying their hands

Many people believe that the best adhesive for tiles that which is done independently.Such a mixture is made of sand and cement.Cement acts astringent and sand - filler.They should have uniform composition and contain no impurities. Note!The sand must be small, the maximum size of grains - no more than two millimeters.

Cement and sand taken in a ratio of one to three.Measure volume acts rather than weight.The mixture is mixed in the water, but before that it is thoroughly mixed.Ready-mix for density should be like sour cream.The solution is not used immediately, but when it begins to harden.

This mixture - this is the best tile adhesive for use both indoors and outdoors.He laid on concrete, bricks, gypsum, plaster and other surfaces.If the cement mix for whatever reason is not suitable for work, in the store you can buy ready-made elastic paste.

instagram viewer