Build Daily

Equipment And Tools

August 12, 2017 18:07

Electric snow shovel - volley cleaning area

click fraud protection

electric snow shovel - basic and accessory

If you want to use advanced technology to clean their area of ​​snow (and sometimes from debris), be prepared for the fact that the usual soviet work surface you will not see.Of course, much simpler piece of plywood nailed to the handle of a mop and just a couple of days to shovel the snow a couple of hundredweight (simplicity of this action, by the way, is highly questionable).

But even easier to take on a telescopic handle and direct the snow machines in the right direction.Here, by the way, and the first component of our unit - sliding handle, the length of which you can adjust by itself.Typically, electric snow shovel equipped with extremely simple.In the first place the handle at the end of the rod, which should be two wing nuts, one for fixing the telescopic system, the other for securing the rod moving the auxiliary handle.

Further, actually, the instrument casing, inside which hides the electric motor (cable often passes through the bar, near the handle is a socket for the extension).At a special axis in the lower part of the casing there is a nut, which is loosening, you can change the nozzle - rotor brush back and forth.And, of course, electric shovel has an extension cord.

electric snow shovel - preparation for work

to gardening equipment served you faithfully for a long time, it must be operated strictly as prescribed by the manufacturer.In particular, electric snow shovel before it should start some time to be outdoors, to have time to cool to ambient temperature.Also, you need to take care that the power strip is not exposed to moisture, which is true for any electrical appliance.

depending on whether winter or summer in the yard, in elektrolopaty body should establish a rotor or a brush, in any case, not vice versa.

Many electric shovels management consists of several keys - look up their location, at any moment you can stop the machine and run it again, do not focus on the remote .As a last step, just before turning on the electric motor, press the Release of the rotor blades, or in the first few seconds of operation, it can be damaged.

Easy in action electric snow shovel

correct procedures - a pledge of high-performance technology, but even more important when working with garden tools, including mechanized, observe safety. preparing the unit to work, check the site on the snowy tracks should not lay branch, wire, toys, to the rotating parts are not damaged by a collision with a foreign object .

When you're holding a working electric snow shovel, do not point it at yourself and, even more, on others, try to close did not have children and pets.too, need to properly operate tool.When clean the track, keep the shovel is not straight, but slightly at an angle to the mass of snow flew away to the right or to the left, beyond the borders (if any).

work better when the snow layer is not higher than 10 centimeters, with a greater height drifts unit can not cope.Try not to clear steep slopes, on flat did not move across the slope and very carefully change the direction that the working part is not faced with a dense and deep weight of snow.

instagram viewer

Categories

Latest Blog Post