Aluminium facades - all of this finding for the construction

Facades of aluminum - the pros and cons

mainly aluminum facade panels are used for decoration of buildings.In this case, it provided the so-called "ventilated facade".Basically it is used for finishing the multi-storey buildings as well as in the homes of low height, it looks pretty ridiculous.Aluminum front profile with a glass filler (or MDF) can be used for arrangement of kitchen cabinets.

This facade has a large number of advantages .The most important advantage is its resistance to temperature changes, effects of weather conditions (rain, snow, frost).The present method is durable lining, and it may have different sizes.

In one front frame can combine several materials.Another advantage of aluminum cladding is resistant to mechanical damage, but also the ease and speed of installation, a variety of color material.

However, aluminum facades have disadvantages and .The most important drawback is the high cost of the material, especially metal may eventually lose luster and color.Also, such a structure can be easily scratched, and sharp corners design can cause human injury.

Aluminium facades - the production and use

mainly used for building facades, aluminum panels, which have a fairly sophisticated device.The manufacturing process involves the following stages:

• aluminum sheet covered with several layers of anti-corrosion (paint, film, plastic plate)
• stove goes through several stages of coating;
• lacquered panels needs several times by different lacquers, over which after drying glued protective film.

From these plates can be done the whole facade aluminum structures.Presented panel made of aluminum tape, so you can make them different widths and lengths.Facade of the plate looks very nice, especially since it can be easily mounted.Such a facade not only provides good protection of the walls, but also their good ventilation to prevent rot wall, the appearance of mold and mildew.In addition, it provides additional insulation of the building.

Since the quantity of plates is large enough, the aluminum facade systems are installed quickly.Moreover, such material does not weigh down the building, as well as helping to align the walls and hide various defects.

installation of aluminum facades and operating features

assembly of aluminum facades made of stacked elements, which form the structure of the entire appearance of the wall.This requires brackets, profiles, insulation and, in fact, facing plates.

installation of aluminum facades begins with the installation of brackets, because thanks to him weight of the structure is transferred to the load-bearing wall.They must withstand the required load and its change in length depending on the situation.Naturally they must be made of a metal which does not give corrosive processes.

Next is fixing of insulation slabs of mineral wool, which immediately closed after securing a special protective membrane.Now mounted guiding profiles, in which then installed facing plates.

specific recommendations regarding the care of the data is no facade, it is only necessary to remember that the aluminum does not tolerate aggressive cleaning agents, because its appearance changes, and then wash the surface very difficult.