Build Daily

Building

August 12, 2017 18:07

The cut decking : delicacy above all

feature cutting corrugated

Each notice that the profiled structure is similar to an ordinary sheet of tin, corrugated only.So you can cut with the same methods?Experts believe that this is not true.After decking is not bare sheet steel, it is processed in special ways, covered with a protective layer against corrosion.When cutting is necessary to try to preserve this layer to a building material did not lose their precious properties.

Cutting corrugated especially those that so important coating is not capable of withstanding high temperature therefore need mostly cold techniques.This is the main stumbling block, and on the basis of which instrument is chosen.It is obvious that one should not use plasma processes, a blowtorch or something like that.Also it regrets it must be noted that the abrasive wheel grinders destroy in a place cut all the protective sheeting function, and even ugly charred it.Out of this situation still exists.

The cut decking: Diversity tool

Despite the complexity of the selection, the tool for cutting corrugated board still exists, even in several variations.First to trust gets regular

hacksaw for metal.Working with this tool is made entirely by hand and, therefore, will take longer.Although much effort you spend, because the material can be cut easily.There are still drawbacks, in addition to time spent.You can not cut a sheet of art, only in a straight line, and you need another special table for the convenience of the process, to locate the material.

to fit a curved cutting tool similar in principle - jigsaw .And in this case, the process is already possible to be mechanized using jigsaw.This is faster and more convenient, and greater degree of freedom.

bidder Next there not every owner, if he is not a professional roofer.This is a roofing shears.They are also two options - manual and electric.Surely you do not have occurred to me that such a strong sheets can be cut with a piece of cardboard on the labor class.It turns out you can, and indeed obtained quickly and easily.However, when it is taken scissors corrugated , it does not always get a smooth edge, but if it is then hidden under a sheet with the following roofing, it's not scary.

final tool will still Bulgarian, but with the other cutting element.For these purposes drive for cutting corrugated .It is thinner and more delicate with the object of cutting costs.Able to work it through its material and shape.This is a fairly thin disc of very strong alloy, has at the end of the teeth of the same alloy that will not break.It turns out that the cutting is not so hopeless, we even have to choose from.

few words about cutting corrugated

The cut corrugated board, we have already dealt with.The question remains, what about the durability notched sheet.Even if you have tried as much as possible to maintain the integrity of the coating, on a section of it still is not.We are able to only reduce the damaged area, which, in fact, the proposed instrument is feasible.Restore the protective coating, we can not afford, but we can protect this place, for example, to the moisture it has not picked up.

Here trimming process is finished, the sheet turned out beautifully, without any damage, before installing corrugated cut edge you need to paint .The best thing to do is paint factory, which in most cases is given in the kit, or spray it may be asked to provide you with the purchase.Then problems with color and texture, is not likely to occur, and all seams are protected from the damaging effects of the environment.

instagram viewer