Securely attic folding stairs handmade ?

We design attic folding stairs

Yes, the basis of everything, even a modest bench of three plates should lie with the calculations of the project of connection points and approximate forecast reliability.Of course, it's hard to tell without some knowledge of the resistance of materials which withstand the weight of the ladder, but, by definition, the thicker the board, the more difficult it breaks.Therefore, we will not waste time on trifles, to obtain a strong attic folding stairs, take the pine board 30 millimeters thick.Do you think that a lot?And if the kids start running up the stairs?However little to be found.

Next consider the future site of work - namely the zone in the area where we want to make access to the attic. By the way, attic folding ladder, section sizes of which depend on the height of the ceiling, require a wider opening than a telescopic sliding model.Therefore, we consider not only the standard options, but also those who may seem very surprising.

For example, how do you see the fact that the ladder will not get out of a hatch, and when folded will hang beneath it, if not on the wall?Or, another option, it will not be folded section by section and stage by transfer from a horizontal to a vertical state.In other words, they simply recline as the seat backs in the cinema.You can think of other, equally interesting options, simply connect the imagination and use it to maximum advantage.

folding ladder to the attic - Getting Started

first and main advice - do not reinvent the wheel.If the attic you will not often look to what you ample tread?Take an ordinary ladder suitable height.Under the hatch secure a solid board, let it be tridtsatimillimetrovy array.Later, it will fix hinges string stairs we to start sawing into 3 equal parts.Trim shoes are interconnected so that they folded "accordion".In the retracted position the middle section will be between the top and bottom, it turns an ordinary folding ladder to the attic.

If you make a collapsible ladder, do not clean up the attic hatch shall recline up, not down to open.

Now on top of the string can be mounted hinges that securely mount a pre-harvested board on the edge of the hatch.If you want to fasten the ladder to the wall, it is desirable that the opening was made loft somewhere on the edge or in a corner room, directly over the wall.Then, on the strengthening of the lower section, somewhere in the middle, an ordinary door chain, and on the wall - the groove for it, we get an excellent fixation of the folded ladder on the wall.

If you want to pull up the ladder on the ceiling, get fifteen hundred hand-drum winch, mount it on the wall, and a few blocks - chain up to the hatch.And now the folding attic stairs with his hands easily rises and there is fixed with a locking mechanism.

Wooden folding attic stairs folding type

Yes, there are such.More precisely, the conventional wooden folding attic stairs are not, and can only be installed in country houses where craftsmen have built them from matching lumber.The design is very simple, we take as a basis the usual fixed ladder on the wooden bowstrings-kosour.

Making an opening in the attic directly above the wall, somewhere in the deep end of the corridor.We need also the site of the wall in which no door or window openings, and this site should be located under the hatch.It is here that we are attached to the wall of a string as reliable as possible.Next, at regular intervals mount hinged stage, so that they reclined up, the height between the tread - about 18 centimeters.

second string - also hinged, but has already established the first mirror is attached to the free ends of the steps.Now, if they pick up the string hang freely on them, fold towards them down.At the lower end of the string and loose in her mid-set loop, and on the wall at those points, which will be in front of the loop with the folded ladder, fasten hooks.Now, if necessary, fold-out stairs to the attic can be removed in the direction of the aisle by fixing to the wall hooks union.