Hammers finishing brush and its importance in the painting works

Variety and scope

differ bristle brush on the types of material, shape, and other parameters.To better understand the characteristics and scope of each of them, consider all the details.

• flight feathers.They are produced with a diameter of 60-65 millimeters and 100 millimeters in length hair.Good hair bristles when bent immediately rectified.There are two types, weights that require mating, and piece - in the brush holder with a handle.
• Pobelochnye.They have a width of 200 mm, thickness - 45-60 mm, and length of hair - 100 millimeters.They are twice as productive primaries and allow cleaner to conduct coloring.
• Brushes.Often used for whitewashing.The shape is round and rectangular.Work with this brush on the floor or walkways, for it is the glue and casein works.
• Brush fleyts.It is flat with different widths (25, 60, 62, 76, 100 millimeters).Made of quality badger hair or bristles.The main purpose - smoothing fresh paint, that is, getting rid of the traces after the application of centrifugal brush.

All types of brushes can be used not only for its intended purpose.Thus fleyts often used for painting, as well as CEILING.

Getting Started

dry hair too stiff bristles on the brush during leave strong bands that make painting less effective.To avoid this, we recommend you thoroughly prepare the tools to work.The new brush is recommended to lower the water for one hour, thereby softening, swelling, increase in volume and a stronger fixation.The softened bristles and hair put a coat of paint smoothly and cleanly.

Before working with oil paints brush soaked must be thoroughly dry.However, these steps do not guarantee that the process works quite will not stay bands, for separate hairs sticking still not going anywhere.In order to solve this problem, we recommend you trim the bristles, after working 10 minutes on a brick or concrete, pre-moistened brush in water.

Important!Align brush by burning is harmful for her, because at the same time burn the most valuable part of the bristles - flags.

Care brush

If the brush is not purchased for a one-time operation, you should give it up after work.The main thing to remember, after painting a tool to put in the water is prohibited because it helps paint clot.After this procedure, the next day it can be safely disposed of.

If plans include the continued use of the brush, then follow some guidelines.Firstly, it should be good to squeeze the bristles on the edge of banks.Second, it is poured into the white spirit tank (special solvent for paints and varnishes), and in it to rinse the brush as long as traces of paint will not disappear.Next, the procedure is repeated, but with a clear solution.

After the procedure, the brush is in excellent condition and ready for reuse.If the work was carried out with the bitumen varnish, then at the end it is recommended to wash the brush twice gasoline.

happens that after working with paint brush is not possible to wash.In this case, it can preserve for several days.To do this takes a cloth, tape, a plastic bag and a little solvent.Rag moistened in solvent and wrapped around the pile.Then brush hammers finishing paint falls into the bag and wrapped with tape.

Tip!Putting such a package in cold water, brush can be stored for three weeks.