Acrylic latex paint and other forms to create a durable coating with your hands

Types of water-based paints

If you're wondering - some latex paint better? That is directly dependent on the conditions under which it will be used, as well as the binder component included in the formulation.The most popular are: acrylic, silicate, silicone and mineral compositions.

• Acrylic latex paint - is the most popular among the masters finishers and builders, because it has a high elasticity and strength.However, it is cheap.The main binding component in it - acrylics.It is also possible to find the composition containing acrylic copolymers and latex.A mixture of the first component is characterized by a low cost while maintaining high quality.The latex adds a material property such as water resistance.
• Silicate paint - is a solution of sodium silicate, pigments and water.This mixture has excellent physical and chemical properties, and therefore has a high resistance to weather events.The painted surface can be used for more than 20 years.However, when you buy should consider one thing - how much moisture content is above atmospheric humidity?If the substrate is more than wet, it is well suited silicate paint.If on the contrary, is - no.This is due to the fact that these compounds have a slightly higher vapor permeability than the rest.
• Silicone paint - created based on silicone resin and water.It combines all the properties of acrylic and silicate compounds, because is considered the most advanced.Its use is limited to high cost.When applying two layers of the paint it is possible to cover the cracks of 1-2 mm, so it is often used for unplastered surfaces.Also silicone latex paint - washable.It withstands more than 5000 cycles of operation with a brush.
• Mineral water based paints structure - created on the basis of cement or lime.This composition forms a stable enough, but vapor-permeable layer.Currently, these compounds are not practically used in construction (40-50 years been popular back) due to the fact that they form a short-lived coating.

Scope Use water-based paints

Scope of this material is quite wide. used latex paint for wood, fiberboard, chipboard, plasterboard, wallpaper, concrete, plaster, brick bases.And can dismiss both internal and external surfaces.However, when choosing a water-emulsion composition is necessary to consider the basis on which it was made.This will more accurately determine which surfaces it is better to use.

example, acrylic blend is not suitable for buildings with damp walls (ie, poorly done waterproofing basements) because they do not have sufficient water vapor permeability.For this purpose, a suitable silicone or silicate paint.Recent formulations are also suitable in the so-called "hard" cases where, for example, old building virtually protected from rising seasonally groundwater.

Mineral mixtures often are used for painting works (finishing brick and concrete walls and ceilings).More suited in those cases where the building is subjected to considerable gidronagruzkam.

few recommendations on breeding and application of water-based paint

painting water-based composition is almost not different from oil painting.However, there are a number of recommendations, under which, the work will be better.For example, the composition can be diluted to 60% sodium silicate.It is added to 5 kg per 1 kg of paint.

may also be used, and a typical office silicate glue.Dilute the paint these components is not required.They do so only in cases when they want to reduce costs.Painting process itself is preferably carried out in 2 sets.This will save you from having to base priming, since the composition is able to seal small cracks.

each layer Drying time is about 1-2 hours.Apply the recommended composition of two ways: using his own brush and roller or by spraying.The second option will reduce the time of work.