Sawing plywood - organize a workplace right

Cooking tool for cutting plywood

Creating plywood masterpieces with their hands require such tools: jig saw, an awl, a set of files, hammer, pliers, handsaw, thrust plate, a pair of compasses, pencil and ruler.Metal jigsaw is used for cutting parts made of wood and plywood.Pawn convenient and safe operation of a jigsaw - a good tension of fixed saws.

Shilo need for making holes in the plywood for sawing sawing jigsaw with internal ornament.A set of files is useful for cleaning the edges and contours of the external and internal.You can purchase and sandpaper, for more delicate processing sections.

Sawing jigsaw plywood is available for both adults and children, because to learn it does not take much.For many timbers - it's fun in their spare time.Having made some thing everyone will enjoy and experience a sense of pride.

sawing plywood - Getting Started

For starters need to select an image and put it on the plywood.To save the material should be compact have all the details on the plywood sheet.Parts having a straight sides abutting each other to produce one propyl instead of two.

will be easier to saw a veneer sheet with details translated it into smaller pieces, and then cut out each piece separately.Cutting plywood is made sawing or hacksaw.Sawing jigsaw frame is fixed in clamping screws teeth directed to the outer side frames and down.

cloth should be well tightly, otherwise it will deviate from the line of cut and leave the tortuous cut.If you need to cut it out inner loop pattern, in this plywood sheet drilled or pierced with a thin awl hole, and it is inserted into the edge sawing released.Thereafter, the free edge of the web is clamped, and continue sawing.

Features of process of sawing plywood

When using a hacksaw blade is required to keep upright.All movement should be uniform, without any effort.Do not allow vibration of plywood, because it can lead to chipping and breakage of fragile wood elements.In the blade must engage all its length, it will make clear the line of cut and speed up the work.

During jigsaw must be in the same position, and the sheet with a picture hang on the nail file, thus it is necessary to make sure that the line cutting was strictly along the contour of the figure.When a jam occurs in the web parts you want to rotate the jigsaw aside and pull it, or completely remove the blade by releasing the clamping screw.

In most cases, the web jammed due to the fact that it bears the defective areas in the form of concavities, which complicates the work.This can be corrected by light hammer blows sawing on a flat metal surface.

After sawing must carefully handle the details.Requires clean contours of parts, remove any burrs, roughness and other surface roughness.Then polished details.Then thoroughly clean the piece with a soft brush on the wood dust and varnish or paint, if necessary.

sawing made various things: frames, boxes, lampshades, shelves and so on.Products made of plywood in the form of plates and carved inserts perfectly decorate home furniture.With careful handling such products will serve long, without losing the attractiveness of appearance.