Laying linoleum on the wooden floor - a new decoration for the old coating

laying linoleum on the wooden floor: the main advantages of the material

Just note that linoleum is called a material of natural origin, a part of which has a flax oil, resin from wood, fabric made of jute, cork flour, limestone powder.It is used mainly in those areas that have the highest permeability.These include a kitchen, say, or corridor.

The choice of this material as a floor covering is not accidental, because it has many advantages.To those include:

• resistance to moisture penetration;
• strength;
• elasticity;
• resistance to wear;
• ease of care;
• simple process of laying;
• large range of available colors and patterns;
• affordable price.

Preparation for laying linoleum

Before laying linoleum on plywood is made, you must carefully prepare the material for it.So, to get started is to decompose the material in the room and give it to straighten.

Attention!This process should take place at a minimum air temperature of 16 ° C, humidity 40%.

determine when linoleum is ready for installation, it is very simple.It is necessary to ensure that its surface is left folds and kinks.If there are defects on the linoleum, which are not smoothed, straightened it forcibly.To do this, place a heavy object falls folds.If this does not work, it is quite possible to return the defective roll back to the store where you purchased it.

It is also important to know how to calculate the required amount of material.To make this measurement room in length and throw with 10 centimeters on each side.If you decide to do packing material with a pattern, then make sure that you cut off to 1 span with a pattern in reserve.

Options laying flooring

laying linoleum on hardboard can be done in three ways, which we will tell you now:

• The fastest option is the option of laying without adhesive material to the floor.The only thing you should pay attention, because this is the fact that this method is only possible if the floor area does not exceed 12 square meters.

Attention!The disadvantage of this option is the installation of linoleum - a fast wear process.Furthermore, the risk of the formation of waves.

• The second method is laying linoleum gluing on double sided tape.The main advantage lies in the fact that at any time the coating can be dismantled.But such cases are not uncommon when on the floor is still a trace of adhesive tape.
• The most durable and reliable way is to install laying linoleum on the glue.Resorting to this option, you will be free from the disadvantages of the above two options.Mandatory such a method, when the floor area exceeding 20 square meters.Its only drawback - it is time consuming.

produce laying linoleum

So laying linoleum chipboard or any other wooden floor using the following algorithm:

• disintegrating material on the floor, leaving a margin around the edges of 10-15 centimeters.
• Next, starting from the middle and going towards the edges of the floor covering, linoleum flatten.This is done in order to lay down cover tightly to the walls on the edges of the room.
• If you choose a method without bonding, the excess coating residues are cut with a knife, and in the doorways stuffed rack-threshold of the metal.
• In that case, if the installation has been decided to make a two-sided adhesive tape, it is necessary to glue the entire perimeter of the floor with adhesive tape before laying the material, and after that he lay linoleum.

Please note that the installation of a two-sided adhesive tape made gradually, in small segments, each segment in parallel smoothed from the center to the edges in order to avoid the appearance of waves.

• when installing flooring with linoleum adhesive mastic slazhivaetsya twice, after which the roller or brush applied to the floor a uniform layer of glue.Next, half bent, and smooth out any unevenness.In the same algorithm used when bonding the second half of the linoleum.Produce pasting the second part must be at the expiration of 20 minutes after the first.This will grab the glue and not allow the floating cover.Finally, it should be noted that the laying of the flooring must be submitted to make in the first place, even before it was mounted drywall !