Parse door handle interior door

Each householder is useful to know how to disassemble the door handle in the interior door, because these devices are often broken, and open the door handle or repair is impossible without it opening and parsing.

Make it easy, but before you start is better to know exactly how to do it, otherwise there is a chance a chance to finally bring the handle into disrepair.

article we will examine the classification of door units, as well as the way in which they can be disassembled.

Video will help you to repeat this process if your interior door hardware inoperable.

types of accessories and how to separate it from the door

Despite the fact that the Russian market presents options for the door handles in a wide variety, any pen may be assigned to one of three types on the device.

first type - landline.They do not have to lock the door and fastened with screws.These handles make the most different geometric shapes, which are possible due to the absence of the castle.

Sometimes the model data set of roller clamps, which are needed to keep the doors closed.Most of these handles put on glass doors or those with aluminum frame.

next type - push.They differ in that in the end of the housing is embedded in the manufacture of special latch connected to a spring which keeps the door closed and does not allow it to open.

If you click on the device, the latch goes into the body and allows the door to open.

Such models are very popular among consumers, and can be used for interior as well as for the front door.

These types of accessories are divided into two types: the first equipped with the mechanism plate-mosaic, which is mounted through the castle, but she fittings mounted on a pivot, which is selected in strict accordance with the size of the door leaf.

If the rod in this device becomes unusable, it is necessary to change all the hardware, sincereplacement of other parts becomes impossible.

devices with separate plates, unlike the first, may be without a lock, their design is somewhat simpler and their operation depends on the size of holes and key pads that are installed in the device.Hands-

noby - the following type - always equipped with locks, with diverse in form, may be in the form of a sphere, and in the form of a lever.At the center of this handle keyhole cuts.

Once the handle is inserted into the key, it activates a special lever (button or latch), which makes it possible to open the door.

Such a model is in demand among consumers, and most of these handles can be found in the doorway of bathrooms and toilets, however, and they are installed interior doors often.

Before working with the lid unit, prepare some tools:

• flat or Phillips screwdriver (it depends on the choice of screws, which are installed in it);
• key equipped with a focus for operations for assembly and disassembly of accessories (if there is no such, it is possible to use conventional awl);
• wrench;
• pliers.

How to disassemble hardware?

If hardware is already attached to the door, then before you take on her analysis, you must first detach it from the surface, no matter what type it belongs.

It will have to be removed from the handle located on top of an overlay.It is located at the point where the lever or button for locking.

Video:

Remove the cover, you can use the key or sewing, for this you need to put pressure on the rotary latch lock, which is inside the fitting.After these steps, detach the handle and lock the axis of the body will be easy - just pull it.

After parts are removed, you need to remove the screws that hold the handle with a screwdriver (usually two).When this is done, supplies, divided into two halves, should withdraw completely from the door.

Sometimes dismantle handle can indiscriminately into two parts, for example, if the door is reinstalled at another location.

Let us examine in more detail how to handle understand different models.

Remove fixed door handle easiest - it is attached to the door with screws, which need to unscrew to remove the hardware.

These handles are broken very rare because of its simple devices, so it is usually required to remove it only when I want to change the model to a more modern and functional.

To remove it, unscrew the retaining screws using a flat screwdriver and then remove the handle from the door.

If it is mounted on a pivot, in this case, you must first remove one of the holding pieces, and then the second part depart independently.

Check whether the device is mounted on the rod as follows: one hand you need to hold down the handle, and the other to try to turn it.

Push harder types of pens in the device, and therefore their analysis requires a bit more time.All work takes place in three stages.First of all it is necessary to remove the screws holding the cover.

Then remove the retaining tetrahedral rod - after it is separated, furniture will be easy to come unscrewed.The third step is to remove the second cover and remove the remaining fragments and the axial rod.

Circular door hardware Knob with lock have to deal longer than any other, and the device it is more difficult, but these models can be put not only on the room doors, but also to the input.

first step is to remove the flat pad which encircles the dial.Then, using a key, click on the stopper, who was hiding under the cover plate, and pull the knob out.

Instead, the key can be used any suitable thin sharp object.Once you have pulled the handle, it moves away from the door and open the screws holding latch - they also need to be removed.

If knob does not need to be removed, but only to rearrange, then we must act as follows: in the door to insert the latch, and the sloping side of the tongue should rest on the closed door leaf.

Once the details are set, they must be secured with screws.Then put the rest of the hardware containing the mechanism for key, on the part of the door, which you have chosen.

press part must be placed on the reverse side and secure it with two screws.

Once everything is installed, check that the door knob turn freely and smoothly rose to its former position.

can slightly move it towards and align if necessary.When it is fixed in position, fasten the top trim strip and insert the last item in the tension of the accessories.

lock fittings to be deployed so that its slot has been in the same position as that of the plate with a square rod, becauseit must enter smoothly and freely in the pen.

final step is put on the device itself, it must reach the stupor, then it should be a little sink, this press across the axis of the clamping accessories.

detachable part of the device you need to push all the way, so that it came to the design pressure.

Video:

Now you can put on the trim, after checking that it matches the groove on.

Recheck how well fixed fittings and whether it turns freely and stands in its place - it is the way to turn it on each side (the one where the lock, and the one where the drum latch mechanism).

Dismantle round fixture with lock hardest, but instructions and videos to help you with this - to cope with the process once, in the future you will be able to easily repair the door handles quickly and effortlessly.