Shovel for snow removal - recommendations when choosing

snow shovel: a few words about its structure

If we talk about the design of the instrument, it is reminiscent of the scoop, but more and more widely.The material of construction of the shovel, is of several types: plastic, metal, plywood.But in any case, winter shovel must be durable, reliable and durable.

Because, in addition to the material, it is important to pay attention to its other characteristics.First, let's talk about the bucket.Snow it must be easy to fold and gain, and, moreover, does not stick to the bottom.Bucket depth should be such as to maintain a decent load.Second, often the ladle equipped slats.They are designed to protect the tool along the edges of the deformation and abrasion.

Third, in addition to the bucket, should be comfortable handle.It is advisable to stalk ended specially equipped handle, then the tool will not slip in your hands and ensure a secure grip.

Shovel for snow cleaning: how to choose it?

Before buying this tool, it is worth to know a few rules of selection.In the store, inspect carefully shovel.Do not be afraid to experiment - tilt it, hold in their hands.Further attention should be paid to the following parameters:

• Working width bucket.Talk about what it should be, it is useless.There are completely different parameters width.Choose is based on your physical capabilities.
• Length cutting , which also verified independently.To do this, take the tool in hand and try to wave them.If the body is not much body bent forward from such a stroke, this shovel for you.
• Ease handle is ensured by special rubber pads.
• form the working surface .If the reverse side have ribs, they significantly improve the glide.And the presence of the flanges on each side of the snow will not fall apart.
• matters and tilt bucket.It is important that it is attached at an angle.Thus, he is able to act as a lever.This will greatly facilitate the work.
• By design is collapsible shovel for snow and one-piece.The first option is to buy only when you need it compactly stored or to be transported.In terms of reliability better than the second option.
• Tool material .As already mentioned, they can be made of plastic, aluminum and typical plywood.The best recognized plastic as they are lightweight and reliable.In addition, it provides a long service life.

Note! If you buy a tool and not to make its own hands, it is better that it was a snow shovel plastic

shovel snow with their hands: how to do it correctly?

Homemade snow shovels are doing most of the plywood.You will need plywood, size 40x50 cm, the bar about 2 cm thick and the size of 40h7 cm, galvanized (or any flat plate), which should have 50h2 size 40h6, 15h2 and 3x3 cm, and of cutting, it is selected depending on growthhuman.

begin production of shovels to the bar, which create segments.Then they beat him plywood.It is important that the number of nails was more than 8 units.To do nails are not "broken" plywood to attach their need through galvanizing.In the center of the bar make the recess for the cutting.While one of the cutting edge should be cut off at an angle of 15-20 degrees.

attaches it to both sides of the nails and through galvanizing.At the last stage process resulting nazhdachkoy tool (in order to make it more smooth).This wooden snow shovel ready!Feel free to use it!