Tool putty - like arm for the construction fashion?

Caulking - an operation that requires training

In the process of repair is very important to correctly perform the painting work, it depends on them to make repairs durability.Professional finishers know that 8 out of 10 surfaces that require painting, pre-need to align.

Independent work with putty does not always give a positive result, the wall can efficiently handle a professional who has managed to "fill the hand" and clearly see how much you need to put the finishing material.

large set of special tools not only to work competently with the composition, but also to cook it properly.The fact that the paste is applied to the surface, quickly freezes may crumble or, conversely, be too liquid for use.

Experts advise to prepare a solution strictly according to the instructions, but if the result is inappropriate consistency, add water or dry mixture can be in the eye.

Tools for plastering - arming

One of the most useful tools for putty is a special mixer with a long nozzle.The device allows you to instantly stir the mixture, remove all lumps.In other words, a mixer - a special nozzle construction on the drill, which should be in the arsenal of anyone who is planning to make repairs.

special set of spatulas will not only quickly applied to the surface of the plaster, but also to remove the excess.Professionals like to work with two different spatulas once, in the process of separating the leftovers and use them in the future.

Special brushes and rollers allow water to moisten the wall or qualitatively apply primer to facilitate adhesion of the material.Rule - another useful tool suitable for use with a thick layer of putty, a kind of spatula putty without a handle - big rail, quickly separating the unnecessary parts of the material and distribute them to the surface.

Set skins varying degrees of granularity - addition, which is available upon completion of the work.Once the plaster dries, it will need to trim.Stachivaya superfluous, as a result you get a perfectly flat surface.

Working with

tool Working with a drill, it is important to follow the correct installation of the nozzle, otherwise it may fall off, and the entire structure is on the walls and on the floor.Work with a spatula should be carried out quickly, the composition does not tolerate delay, it freezes in the air and forms lumps.Thus, learning to work immediately with two spatulas, a man increases the speed of the surface treatment.

Hand trowel like those who know how to align the wall, work to rule is simple, but the great mass of the composition can easily fall to the floor or move through the tool edge. interesting tool - a gun for putty, it can come in handy if you want to create a volume image .Spraying the composition in a chaotic manner, you can get a real masterpiece.

As a rule, after setting his dyed material, thereby making the pattern on the surface even brighter.Practice shows that the skin - a tool with which work begins after drying putty - one of the most relevant elements.Stachivaya too much, you form the perfect figure or, if necessary, level surface, removes jaggies and an extra layer.