Punch device : how it works ?

What is the punch?

As already mentioned, the punch, the purpose of which we describe below, can be used in several ways.Firstly, it is much more effective than a drill, drills various holes in concrete, stone and similar materials (where necessary impact force).This is achieved thanks to a special pnevmomehanizmu, it works like a jackhammer.Because it can be used as Stroebe grooves in the soft plaster.

Secondly, to use a special adapter (adapter) that is used as an active tool and drill.Only it is important that the adapter had a tail SDS.It is he who gives you the opportunity to connect with a jaw chuck tool cartridges.Third, the hammer is used, and a screwdriver.

Design and Function

punch puncher design includes a reverse (or brush may be electronic), friction clutch, speed control, electronic immobilizer, anti-vibration protection, service indicators, the system simple and quick replacement of cartridges.Of course, depending on the manufacturer, the tools may differ in some details, but, in general, the same mechanism works.

The principle of operation is based on the punch hammer mechanism - Electromagnetic and pneumatic.The first works by two electromagnetic coils.They create the movement of the core in the reciprocating direction.A core passes these blows on the end part of the drill.The second method - air - is provided by movement of the piston in the cylinder in the reciprocating direction (the principle of operation of the punch is most prevalent).

addition to the hammer drill can be used for hard-to-head corner portions of the crown, drills, dust removal system, nozzle for chiselling, drilling angle controller.In

if the jaw chuck is used, it can be applied to all types of devices it.It crowns and drill to punch glass, wood, metal, concrete.

types drills

As already mentioned, there are drills with electromagnetic and pneumatic operation mechanism.Recent divided into three, two and single-mode.The first mode is only drilling.The second (considered to be the main) - drilling and stroke.And the third - it just hit (ie simply slotting).

In order to avoid the question of what it looks like punch, can be said that he looks like a gun with a drill.

Also, this tool is divided by type of drive.So, there are rechargeable electric, network, electric, petrol, pneumatic drills.The first is very handy for facade work, since it does not need to look for a source of electricity.The latter are the most common and are suitable for many processes.Others are ideal for doing roadwork.Well, the fourth is often used in a hazardous environment (water flow, electric shock, risk of explosion).