Boer garden manual - do yourself a tool for the suburban area

Boer garden manual - select materials

In stores you can find a variety of different hand drills.But what to do when shopping for no extra money?You can ask to make a garden and drill their own hands.Costs related to the acquisition of materials for this tool will be much cheaper than buying it.

Garden drill consists of several parts.These are: the screw or drill bit that drills a hole, a metal pole or stand and pen to work with him.

now gradually look at how to do a drill for the pillars.The principle of this manual can be applied to any manual borax.In order to proceed with the construction, you will need a solid sheet metal sleeve 1.5-2 meters.Still need to drill for metal.As further bit can be used for other purposes, it can be manufactured more screws of different diameters.

Garden earth auger - like strung blade properly?

of sheet metal cut out a few pieces for the blades.If originally planned to hand-drill for the pillars of a certain size, the diameter of the screws must be 5 mm longer than the hole itself.

Blade center drilled a few holes for rack.What is the diameter of the hole should be?Such that was 1-1.5 mm larger than the diameter of the drill stand.By the way, it is perfect for a smooth fitting.

to fittings was smooth, it is possible on a lathe to process it or to carve a rack of any other metal.This rack is fixed in a vise and drill two transverse holes.They tap tapped.There will be screwed bolt to hold the blade.

Here's our homemade garden drill began to acquire some kind.Go back to the blades-blank.Bulgarian radius cut on the workpiece.This incision will be needed to the flat blade can be stretched to the screw.At an angle of 45-60 degrees to sharpen the bottom side of the cut.

Homemade garden drill - final steps

Stepping back 10 mm from the end of the sleeve, making her abrasive disc pad flats, the depth of which is 3 mm.The very same end sharpened to a spiked species at an angle of 30 degrees.Grinder at the lower end of the bar making helical grooves.As our self-made manual garden earth auger may face a hard ground, at the end of a drill can also be welded.The diameter of the drill should not be more sleeves or vice versa less.

remains the case for a pen.Welded to her desk is not necessary.It is best to put it on or bolt thread if it T-shaped.Why?So you can extend the stand to the desired size, if you have to drill to a greater depth.

Our garden earth auger can be used for digging wells.It makes a few racks of thread, and they are connected by means of transition sleeves.For in-depth work requires strong sleeve good diameter.

In considering how to make a garden drill, we noticed that it was not as difficult as it may seem at first.To drill easier to go from time to time it is necessary to pull out to remove the next layer of soil.Also it is necessary to paint anti-corrosion paint and care for him, to serve as long as possible.

In addition, since the main load is applied to the blade, the metal from which it is made, it is necessary to choose a durable, not flexible and not subject to breakage.Periodically inspect the blade for damage edges and the formation of large burrs.All damages should be clean and coat the surface with paint.