Chimney with your hands : the technical quality and the properties of the installation

What technical characteristics inherent in the chimney?

To install the chimney with his hands need to start to get acquainted with its features: the material (its strength, heat resistance, wear rate, etc.), Shape, diameter.Thus, we consider each item in the order.

1. material from which you plan to install the flue pipe.

There was widespread use of steel and brick vent.Most preferred to use stainless steel pipe with the addition of special substances - molybdenum which contributes to maintaining the surface chimney in specific regions with potential acidic atmosphere.A standard or traditional flue pipe constructed from bricks.Often it is the furnace or fireplace chimney, which is set in a private house.

1. Form

form is of great importance.A more rounded shape capable of accelerated withdrawal of smoke and, accordingly, a smaller amount of carbon black on the surface of the flue pipe.The cylindrical shape may be used.An important caveat - the tightness of the chimney wall.

1. diameter

When installing the chimney with his own hands to pay attention to only the diameter is not quite correct.Also important is the height of the pipe and its multi-layered.When assembling all the components you need to take into account the texture of the surface material.Excessive roughness leads to subsidence and soot clogging flue pipe.

What are the types of chimneys?

chimney design their own hands should pass on clear rules.Mounting begins with a clear circuit that also has the properties - for a fireplace chimney.This implies types:

• furnace chimney.According to the rules of fire safety and designed homes, one is able to heat the oven space with three rooms.At the same time, it is important to set the oven for fear of ignition of combustible materials.According to the standard it contains one chimney.Smoke communication is mounted vertically, without error deviation of 30 degrees.It is important that the coating was not home from inflammable components (otherwise you need to isolate the chimney with metal plates).If the flue multilayer sandwich, it must be isolated from the cold and by means of metal sheets.

Please note that the design of the primary role played by the type of use of chimney pipe.The slightest error can adversely affect its operation and cause alteration chimney communication.

• Chimney fire

Knowledge of installation of furnace flue can be useful to install a chimney fire with his own hands, because in many respects they are the same features (functions, combustion source, the operating principle).If the fire is not a major source of heat in the room, the radiator pipe may be used, which consists of plates and has the ability to spread the heat more weight.Fireplace has a more open structure, so when designing should be paid close attention to thermal insulation.

Note: the location of the chimney sandwich near a wooden or plastic surface, it is necessary to protect the material from basaltic component.

• Installing a chimney for a bath

Because copious amounts of steam in the steam bath or sauna, you must make sure that the steam room did not get the smoke and harmful combustion gases for dying.For this purpose, a special pipe insulation in the form of metal plates or sheets.Run like isolation is necessary so that the steam room did not occur heat leakage.

• Sandwich speaker and gas boilers

installation of gas boilers is very time-consuming process that radically differs from other types.The main difference is how the fuel is used.under the rules SNIP standards become useful materials under the leadership of sandwiches speaker.Sandwich should have:

• Kondensatostoykostyu;
• tightness;
• not prevent cravings;
• Having direct access to the street.

For a more complete review of each type of chimney devices offer video in the next tab.

Key error when installing the chimney with his hands

is incorrectly construction chimney can cause serious problems:

• Combustion facilities;
• poisoning from combustion sources;
• material costs.

is important to take into account the layout of the house, the level of acidity in the region in which a person lives, the type of heating, fire safety, the load on the chimney communication.

There are common errors when installing the chimney with his own hands:

• Initially false design;
• Poor insulation;
• Unprofessional adjustment of the ventilation system, which allows harmful gases to penetrate into the room.