Instructions - how to make an ottoman of the tires with his own hands

Dear subscribers building portal - Stroy-Shkola.ru.With this lesson, we continue step by step guidance to improve the suburban area, as well as its design.Today, we will examine how to make the ottoman of the tire with your hands.

Ottoman from the bus with their hands

tools needed to create a padded stools:

1. Rubber tire - for standard-sized padded stools quite suitable tires size 15-17 inches, it is necessary to focus onsize, respectively the more you want to have an ottoman - the more you need to pick up a tire.
2. rope twine - rope size should not be less than 20 meters, sinceropes pretty big expense, besides, above all, it depends on the size of our tires.

   rope twine

3. Electric Drill - it will need to make holes in our bus.
4. plywood sheet - will need plywood thickness of about 3-5 mm, then it will be necessary to cut off in the form of a circle to form harnesses for the padded stools.
5. Glue and nail - glue is required for mounting twine on the bus, and the nail will need to cover and give an aesthetic appearance.

necessary tools to create a padded stools from

tires Step technology

1. First cut the sheet of our plywood because of our tire contour and do leaf round shape, then drill a hole in the lid and the plywood to secure and connectbus and plywood.
   

   drilled holes in the plywood and bus

2. Next, using screws or bolts, but note that when mounting the elements with the bolts you will need to make holes for the cap screws, so that they do not stick out from underplywood covers.Fasten the lid to the plywood sheet.
   

   Fasten plywood sheet to the bus

   

   By the way, note that the plywood is attached on both sides, becauseto the bottom of our padded stools we fasten roller legs that will be moving our padded stools on wheels.
3. start our glue twine to the bus, it is necessary to start from the middle and put the string in the form of a snail, which contributes quite beautiful figure.
   

   Getting laid twine

4. Gluing should be on a solid glue, we recommend to use glue in a special gun, but if you do not have such a tool, then suitable glue - "Moment", but note that itIt must be very sticky !.
   

   Getting laid twine in the form of a snail

5. Further, when the lid is glued our padded stools with string - the string begin to glue directly on the tire itself.
   

   When the cover pasted go to wrapping tires

6. to rope lay on the tire better, we need to turn the bus from the top - down which will facilitate easier fastening ropes.
   

   Overturn bus and begin laying the rope below

7. Then paste the tires completely, and cut off the excess twine and glue on the cover.
   

   Ottoman of tires almost ready

8. Next, paste the cover and cover our ottoman varnish.Covering padded stools lacquer necessary to the rope, which is plastered with our soaked ottoman not exposed to rain.

Ottoman from the bus with their hands

Ottoman from the bus - ready.By the way, as a decoration can tie him to the legs - the wheels, then it will be the subject of adoration of your children.That's it, subscribe and join our group of builders with their hands !.