How to insulate a metal garage - Technology

To the garage was comfortable to work, but your car has served you much longer, it is necessary to insulate the garage.

Abrupt changes in temperature on the street can lead to the formation of rust, as a result of the temperature jumps on the car is able to form a condensate.In the warm garage this can not be.

If you have a heated garage, the more it should be warmed in order to conserve heat were more efficient.It will save you money that you spend on heating.

How to insulate a metal garage

There are many ways of warming of the garage.Whatever you choose, remember that you need to leave ventilation.The garage must come 190 cubic meters of air per hour, provided that the garage is only one car.It is desirable that the garage temperature does not fall below + 5 ... 10 degrees.

at warming the garage do not make it too hot.The fact is that if the garage is the room temperature, and on the street below zero, you will be exposed to rapid temperature changes the car, if the street will call in a warm garage.Moisture will appear on the machine, which greatly contributes to the formation of rust.

For warming the garage need to use materials that have a low heat conductivity.Such materials include polystyrene, mineral wool and similar materials.

Pay attention to that, so that your insulation is applied to non-flammable material, as is often the garage there is a danger of fire.Good insulation also has to be waterproof.

How is insulation?

Approach insulation metal garage should be in stages.Close the heater must be doors, walls and ceiling.The most convenient insulation for metal garage is a mineral wool.

Mineral wool insulation is perfect for the garage

Its pretty easy to install, it does not burn, and provides good insulation is inexpensive relative to its peers.Glass wool is not much cheaper than mineral wool, but it is highly flammable and deteriorates by moisture.It is also possible to use for insulation foam garage.This material provides good insulation, able to soundproof, resistant to moisture.Normal foam melts, however, there is foam, impregnated with the composition "BSS-S", which is in contact with the fire will go out.Only such a foam suitable for insulation of the garage.Another undoubted advantage of foam is that it can be easily mounted.

can use a liquid foam insulation or other similar materials.

How to carry out the work?

Before turning to the works, the garage should be freed from all things that are therein.Then you can start.

If the walls of your garage dented, it is desirable to align.Be sure to wash all the dirt from the walls that they had no oil stains, paints or other components.

To install sheets of foam you need top and bottom of the wall to attach the L-shaped profile.He will stop and the metal sheets to the foam.By the walls of the foam is attached with a special adhesive.Glue spreading wall dotted or smeared spatula.Most convenient to start work from the bottom wall.Each row should be laid, bandaging joints.Complete drying glue to happen in three days.For beauty, you can paste over the sheets of foam and plaster mesh paint over it with paint for facades.

If you plan to use mineral wool, you have to do crate.It can be made of wood or metal profiles.If they used wooden beams, it has to be pre-treated with the composition against fire.

Thermal insulation using mineral wool

Crate strays nails or screws going through.You can pull the metal elements bolted.You should get a square cell in increments of no more than 60 cm. Crate fixed to the wall.Mineral wool is inserted into the cell, and then close the frame with sheets of drywall.

How to insulate the ceiling of the garage

preferred to use foam because it does not require crates and extremely uncomfortable and is generally not recommended to do it on the ceiling.The method of fixing the foam is the same as in wall insulation.

When insulation garage insulation is important to pay attention to his gate.Gates occupy quite a large space, as well as a garage metal from them goes cold.Through the gate is able to penetrate moisture and can blow cold air.

Insulation of the ceiling of the garage with the help of foam

For doors traditionally used polystyrene.It has an advantage over mineral wool, since the latter spoiled by moisture and requires the installation of lathing.Penopolistrol may burn, but by treating it with a special compound, you can not worry about it.

Warming polystyrene

penopolistrola Plates can be fixed with adhesive mounting.Positioning sheets need to offset.Gaps between them filled with foam, then all this is covered with foil and fixed with adhesive.Do not forget to leave a gap for ventilation.Top design sheathed copyfitting.You can replace it with a plastic equivalent.Plastic for interior decoration premises easier to install and, unlike the wooden elements, it does not burn.It is not recommended to use for this purpose, corrugated sheets, as they will reduce the metal and insulation quality.

Video - insulation metal garage polystyrene