How to glue ceiling moldings with their hands

As usual, moldings on the ceiling glue in the final stage of repair, when all the rest of the work on the walls and on the ceiling has been completed.Modern ceiling plinths often made of the following materials:

• foam;
• Polyurethane;
• Polystyrene;

feature of these materials is that they are practical, easy to work, durable and most importantly absolutely pure environmental terms.Among the above materials, especially want to highlight the polyurethane.This material is truly unique - it is easy to bend, allowing you to do even radius corners, extremely fire-resistant, not afraid of water and does not absorb any odors.Its only drawback, if you can call it a downside - a higher price compared to the foam and polystyrene moldings.

How to choose a ceiling moldings

Before you begin work, you need to choose a plinth.Ceiling skirting boards are of the following types:

• convex or concave;
• different widths, different texture and pattern;
• skirting length varies from 1.3 to 2 meters.

Of course, the choice of the plinth depends entirely on the preferences of owners of apartments, but there are general rules of their choice, which we will tell you about.For apartments with high ceilings, designers are advised to choose a wide and massive ceiling plinths and for rooms with low ceilings, opposite the narrow and thin.This is dictated by the fact that the wide skirting visually more "priopustyat" ceiling and narrow and thin on the contrary make the ceiling higher.In addition to the ceiling height, you should consider also what the wallpaper will be on the walls.So if you prefer a plain wallpaper, it will look beautiful plinths decorated with pictures, and if you like the wallpaper with pictures, it is best to choose a smooth plinth.

Sticker ceiling moldings with their hands

operational supply the following tools and materials:

• Joiner's wort (allowing to saw planks at the desired angle);
• Jig saw, hacksaw or a sharp knife:
• Construction measuring tape and a pencil;
• Adhesive base (liquid nails, special adhesives, sealants, etc.);
• Well, of course, directly the ceiling moldings.

Getting sticker plinth.Start to glue the plinth should be on the long wall, gently pressing one side of the strap to the wall, and the other to the ceiling.If you have enough wall flat, do not try to squeeze the bar smoothly to the wall, otherwise the baseboard will repeat the curvature of the wall, and it will be immediately noticeable.Instead, under the bar will remain empty, then they can be mask putty or sealant.

How exactly cut corners ceiling moldings

For this purpose, we must come in handy carpentry.With this tool, you can quite easily make cuts nearly perfectly aligned and the required degree angle.Most often it is 45 degrees and 90 to start can work with a small piece of the plinth, but we assure you that with the help of carpenter's wort, this work is not difficult.

Videos like glue ceiling moldings with their hands

glued Finishing skirting

assembled the plinth, carefully zashpaklyuyte docking locations and angles.It is worth to treat the surface skirting primer, it will help in the event that is supposed to paint the baseboard.Painting skirting better to do with latex paint.