Technology gluing wallpaper on non-woven basis

walls at the entrance to any premises are the objects to contemplate, and each owner seeks to make them difficult to perfect and flawless.For their decorating today there are a lot of unique solutions.They can be painted, they can perform a decorative stucco or wallpaper paste over.This last method is the most common, because with this material, and still with a beautiful textured pattern, you can create a truly unique atmosphere.Moreover, modern technologies allow to make a wallpaper that can be painted several times.These include non-woven.In this article we will look at the technology of gluing non-woven wallpaper, but first, get acquainted with their species and the basic principles of selection.

Types of wallpapers and their benefits

Fleece wallpapers are one of the best materials for walls and ceiling.What are their advantages?They, being naturally occurring material, have excellent breathability performance due to the porous structure.Glue non-woven wallpaper on the walls allows them to breathe, thus preventing the formation of mold and mildew development.They can also be repainted many times.On sale there are models that can withstand up to 10 cycles tinting water-based latex paints.This wallpaper is only becoming stronger and more resistant to stress.But because of the dispersion of latex powder porous structure of non-woven wallpaper is changing its look and textured with each coat of paint, they become less attractive.

wallpaper Many tinting cycles they can withstand due to the multilayer structure.Their carrier substrate is a fibrous cellulose which has incredible tensile strength and tear.

But do not doubt that they are not melted at an excessive thickness of the adhesive layer and does not swell.Yes, they do have such a property.Therefore, it is important to respect the proportions and not to forget the glue carefully spread over the surface of the wall.

now commercially available for at least two kinds of non-woven wallpaper, sticky walls which will design an exclusive and unique:

• Textured or grooved.They perfectly hide blemishes and small flaws surface of the wall, creating an uneven surface.These wallpapers can be used in absolutely any room, but it should be remembered that they are less amenable to the sink.It is better, in general, do not wash.
• second type of wallpaper are busy stamping.Thanks to technology, they are more durable, but also more subtle.This property suggests that Non-woven wallpaper pasting this type of poorly prepared wall soon The beaten nuances and defects on the surface.Therefore, they should be used only in well-prepared ground.

Depending on the colors on sale as there are two types of wallpapers:

• Color.They already have a drawing that must be selected and taken into account when calculating the amount of material.
• Monochrome or koleruemye.This wallpaper can be painted up to 10 times, thereby creating a new fresh design of the room.This is the main advantage of this material - with minimal costs significantly change the design of the apartment.

All of these types of wallpapers are available in two sizes with a length of 10 m:

• width of 53 cm;
• width of 106 cm.

Pros and cons of wallpapers of different widths

for gluing non-woven wallpaper with their hands in a small room with lots of windows and doorways, of course, the best choice to stop at the standard width for us53 cm. With them, in such circumstances, less fuss and hassle, but they are more expensive than the meter.

The second size of 106 cm would be relevant in a large and spacious room.Their glue faster, requires less cut-sheet and half joints, which usually stand at pasting.Moreover, they are cheaper compared to the first frame size.What it is most likely due to the sales policy and the management of the companies producing them.

technology requires not so much the cost for the production of the web width of one meter, but cost almost twice as high.Thus, a slight increase in embezzlement get more profit.

Calculating the number of wallpaper

Rules gluing non-woven wallpaper the first thing they include the correct payment.If there's a large supply, it is, in principle, nothing.But when you consider the durability of the material, it's just money thrown into.And because of their relatively high cost than as compared with conventional paper.And the lack of them can delay the repair for a long time or, in general, spoil it, unless there is the same.

When purchasing should pay their attention to the lot number.In one type of wallpaper, he is always the same.Also, the calculation should be added to each sheet of 2 cm. This will help to avoid distortions when the roughness height from floor to ceiling.

Each seller has calculated a table, on which you can always determine which number of tubes required for placement of such a parameter.In a few words, it's pretty simple.Manufacturers produce wallpaper with a small margin on the length, which is about 10 cm. And when you consider that the distance from floor to ceiling is 2.5 m, you get 4 of the segment with a margin for each 2-2.5 cm in one roll.But this is true, if there is no need to pick up drawing because of his absence.If the same pattern is present, it is necessary to take into account his step, which is usually indicated on the package.

Furthermore, for the calculation, it is necessary to find the perimeter of the room.If it is 10 m, the 53 cm pipes need 4 pieces.In this case, the stock is still 1 sheet and a quarter, if you subtract the area of ​​the door and window openings.More precisely calculate the amount of wallpaper help online calculator.

Widget from SocialMart

technology training base

Quality pasting wall wallpaper on non-woven basis must be carried out on the prepared wall surface.They should be easy to smooth and even.Bumps and pits on the surface in any case lead to warp or deformation of the sheet the line connections.This, you will look silly at such a cost of wallpaper.

To align the walls need to use putty with subsequent grouting.And what primed the walls before gluing non-woven wallpaper?The wall must be carefully covered with primer high penetration.Non-woven wallpaper is quite heavy finishing material, therefore, require strong and reliable base with high adhesion.For simple wallpaper enough to use as a primer adhesive himself, but for the non-woven it can play havoc in the future.

Pasting of walls Non-woven wallpaper is carried out on the markup.Typically, the wizard recommend starting from the far corner, or from the window.But it was true when thin slips were issued with a special inlet for the wallpaper, the seams are less noticeable.Today, the technology requires a responsible approach and close connections sheets in a single plane.So we start counting from any convenient and the most level place.It is also necessary that the first sheet on it went without bends and cuts.This place can be a window opening, a door or a corner.

Apply markup

wallpaper with a plumb and roulette is measured from the starting point of a distance equal to the width of a single sheet and a vertical line is drawn with a soft pencil, preferably gray or color close to him.Next, the counting continues from the existing line along the perimeter of the room with a periodic control the vertical line.If you get an angle on one wall to another should be done a small overlap.It may be 1 to 2 cm. This is necessary to avoid a glimpse because of irregularities angle geometry.It then using the smooth tool (long spatula or rules) and acute construction the knife can be easily removed.In the same way bypass and outer corners.

All training walls for gluing non-woven wallpaper is completely done, you can start cutting sheets of wallpaper.Non-woven wallpaper glue should be smeared on the same surface of the wall, but it is not necessary to put it on themselves wallpaper.This will lead to an excessive impregnation of them, which can lead to deformation and loss of appearance.In addition, prolonged storage in a folded state patterned wallpaper outwardly acquired characteristic spiral shape.To fix this, each cut sheet is rolled tightly in the opposite direction and is set to wait for the queue at their place.This will spend less time at the most pasting.

important to remember!If you are new in this business and not sure what to get pokleit butt, then at each place it is recommended to paint the paint to match the color of the wallpaper.This eliminates the chance of selection of white flashes on the background wall color pattern.

Pasting wallpaper

caused markup prepared each fragment stocked ladder and even a brush, a soft roller, brush for wallpaper and a plastic trowel, you can start to work.

Dilute the adhesive according to the instructions.It is important to pay attention to the flow of heavy and light wallpaper.Also manufacturers glue consumption point with application to both surfaces and one.

Dilute the glue necessary to water at room temperature.To this end, it recruited the required amount in the container and, stirring constantly with a stick wide, is filled with a thin stream of glue.It is important to avoid the formation of lumps during the crystallization mixture.If they are formed, the normal reinforcing mesh, they are easily removed.Suffice its lower edge into a container and stir composition.Clots themselves stick to the grid.

technology wallpapering on flizeline basis involves applying adhesive only on the walls of a soft roller.If this condition is not satisfied, they can swell and burst.Prepared and then rolled in the opposite direction to align the sheet turns and gently applied to the surface.Leveling it is necessary to start from the top down from the center to the edges, but do not rub.A roll roller or flatten a special brush.Usually it is used for complex textured wallpaper with a pattern.With the help of a thin bead rolled all joints.It is important not to overdo it, because you can damage the porous structure of the wallpaper, and in this place will dent.About methods and fixes wallpaper joints defects.The best selection of videos on how to hang wallpaper.

Sealing the edges of the sheets on a plinth

For better adhesion of the sheet all the corners should be gently pressed with a plastic spatula.Pruning the excess must be carried out only after complete drying of wallpaper.To this end, a new wide angle and pressed down with a spatula sharp knife assembly removes unwanted piece.For a beautiful and aesthetic finishing sections of the walls around switches and sockets their cover should be unscrewed.And greasing the surface to make sure that the glue did not get into the slot.The best option, if you allow the illumination will de-energize the whole room.For more information about how to hang wallpaper in the corners.

In addition to the instructions laid down would be useful to view the video.