Linkrust and its application in the interior

Application linkrusta interior

As already mentioned, linkrust used in the interior for the walls.This creates absolutely stunning, beautiful and noble coating.The material combines a classic design, environmental, safety and durability.No cover for walls do not yet have such a deep embossed and had a majestic beauty.

Wallpapers linkrusta were produced for the first time in Britain in the middle of the XIX century, and immediately began to apply successfully for finishing many palaces, mansions and castles.Noteworthy is the fact that the coating to become only stronger with time.Tom linkrusta evidence preserved samples that are more than 100 years.The production of this material, and is carried out on ancient technology still using natural ingredients.

linkrust Available in rolls, like typical wallpaper.In addition to high strength, the material also has excellent ductility and maintains relief.That is why this wallpapers successfully used to cover uneven grounds.In addition, the type of wallpaper linkrusta withstand significant changes in temperature, and environmental friendliness makes them suitable for spaces where there are allergies.

glue linkrusta

Similarly, as with conventional glueing wallpaper, beginning of works carried out with the preparation of the base.First, remove the old coating (paint, wallpaper, plaster).Next, align the surface, soil, plaster.Also be sure to clean it from all sorts of stains and grease.Porous surfaces should be primed with special primers compositions.Once the base is prepared, proceed to the preparation of the adhesive.At the same time the best glue for wallpaper is considered Sem-Murale, or PVA.

The second step taken to cut the wallpaper on a firm, level surface.The length of fabric must be greater than the height of the walls 3-5 centimeters.Be sure to angle used in cutting to the edges were smooth.Glue them by "butt", so it is important to know - how to hang wallpaper butt.But there is nothing complicated, just a matter of skill.On the other side, which is glued on top, make a serial number.On the sides there are paintings marker line.This technological "hot flashes" to cut through them.

Warning: features gluing!After cutting each canvas laid face down and moistened with warm water using a special cloth or sponge.Wallpapers need to absorb the moisture they need.Thus, they are left for 20-30 minutes.The field of this procedure, they increase in size of 1-2 cm.Then glue is applied.JAFI wallpaper about 24 hours.

Staining Wallpaper linkrusta

Typically, after applying wallpaper linkrusta decided to paint, but not always.Colours thus can be used any, but many manufacturers recommend the use of oil paint or acrylic enamel.The process of painting is carried out only after complete drying.Colors can be all kinds it depends on the overall color scheme of the interior.

On the embossed faces are often coated or gold shades srebristye paste wax and gently wash away from my own hands (especially when creating classic interiors).Dried paint for several hours.After completing all the work, the coating allows for wet cleaning with a damp sponge or cloth.Sometimes it is possible to use solutions which must not gain the abrasive component and the solvent.