reverse power generator - for what he needs

reverse power generator - for what he needs

Few probably remember how before unrolling the electricity meter readings.We make this transformer, which had to be grounded.The earthing switch is usually served as a battery or other communication.It was very dangerous for life.Now, any foreign intervention in the electrical wiring and grounding conductors.Included in the usual socket reverse power generator and wait for the result.Normal electricity meter disc - shakes his figures in the opposite direction, modern electronic counter - simply stops.

indications Power Calculation of the electricity

instruments for accounting of energy consumption is not always true count used by power electronic components.To check the operation of the electricity necessary to:

• be able to inspect the device.The meter can be in the apartment or on the landing;
• on the front panel of the device is specified accuracy class - it is permissible margin of error in%.For example, if the accuracy class 3, the device used for the 100W / h deems index - from 97 to 103 W / h.It will be the norm calculated for the electricity meter;
• to test the switch to the network only one bulb for one hour, and see the reading on the meter.

If your device for the metering of electricity did not meet the test - should apply for its replacement to Energonadzor.

How to calculate the power of an electric current

Electric counter counts do not consume power electronic components, and the work done by the electric current, and correct - consumed at the same energy.Calculate the electricity power can be in two ways:

• count the number of revolutions per unit of time and compare this figure number indicated on the counter.For example, if there is a component 300, it means that the disk unit 300 performs rpm for one hour.So for 10 minutes, he must make 50 revolutions;
• and vice versa: we set the number of revolutions and see how much time counter will do the job.

Electricity consumption

In order to control the power consumption, it is necessary to know the exact figure, consumption of your appliances.The number showing on the power used is indicated, usually in the technical characteristics of electrical equipment.Knowing this number, and possible ways to check this indicator, you can control the power consumption.Or buy a reverse power the electricity generator and forget about the calculations.However, it should be noted that the industry has already produced "smart" devices for accounting of electricity, which can fix the cheating.Then serious problems with the power company did not escape!