Grout heat-resistant - how to extend the service life finishing ?

emergence and application

Lately one can observe almost universal use of ceramic tiles in interior and exterior decoration of the various rooms, as well as a variety of decorative elements of an interior trim.And it is fully justified, becauseTile is surprisingly durable, environmentally friendly and attractive appearance.

In addition, ceramic tile does not require time-consuming care and at the same time is quite durable building material.But in the process of laying of the material at its junctions formed unsightly seams which need appropriate filling.This task can easily handle all kinds of grout for joints.

Manufacturers grout saw to it that there is no scope of this material are not left out.For wet areas use water-resistant formulations, used for finishing stoves heat-resistant grout, etc.

grouts are also applied to give a beautiful aesthetic appearance of the tile for exterior cladding of buildings and structures.Frost resistant grout has a number of advantages: light fastness, water resistance, etc., that allow to protect the lining from moisture, harmful microorganisms and also premature spoilage.

addition, such grout presents a large range of colors, allowing you to choose a color that is perfect for your liner.They play the role of a decorative tile.The choice of this material in the lining tone tiling hides defects and possible irregularities and chipping at the edges.

If you choose grout, contrasting lining, you emphasize the pattern tiled surface and reveal its decorative beauty.

Grout heat-resistant - distinctive

When decorating tiles stoves and fireplaces with ceramic tiles, heat-resistant grout is required.The principal difference of the grout is to use for its production only the highest quality cement and the addition of the chamotte clay.

Heat resistant grout applied inside the furnace, becausetemperature range withstand this material is extremely high.Grouts of this type can withstand temperatures of up to +150? C? C 1700.They are either gray or white color, since the addition of its constituent color pigment softens solution.

After the tile or tiles, you can proceed directly to the processing of joints.As mentioned above, high-quality grout will hide all defects and tile laying, the poor quality would nullify all the efforts spent.It is therefore necessary to take this process very seriously.

heat-resistant grout - how to work?

work for grouting should start with checking drying glue mixture, which is laid tile.After that, the seams are removed from the tic-separators and joints themselves are cleaned from dust, dirt and debris.

To grout to be applied to the outside of the fireplace or stove, put forward not as stringent as those used for internal furnace works, so to perform outdoor work possible to use epoxy, cement or grout transparent.The basis of the latest glass grit.These seams are effectively looked on surfaces decorated with marble and natural stone.

Dry heat-resistant grout is diluted with plain water from the tap .Just shut the best small amount of this material, asHe quickly sets and hardens.Using a rubber spatula grout is applied to the seam and fills it.

Excess material is removed.And so on with all the necessary surfaces.A few hours after the grouting is carried out complete cleaning of tile aqueous solution without the use of detergents.