Build Daily

Building Materials

August 12, 2017 18:08

Serebryanka - paint with a simple composition or her own divorce ?

click fraud protection

Painting silverfish - why is it so popular?

Serebryanka in finished form The use of silver paint a fairly broad, ranging from household purposes, to industrial.Due to its properties, not only protective, but also decorative, cover the individual parts it mechanisms, tubes and even bridges.Moreover, it is not necessarily a metal surface, and successfully painted wood.Meanwhile includes jewel powder and paint, are sometimes added some pigments.

What makes it so popular?Serebryanka whose composition is quite simple, has a number of positive properties , which are not yet implemented so successfully in other painting materials:

  • layer forms a uniform, smooth, streak-free and sufficiently thin film, but does not flake;
  • long service life (in the air - up to 7 years, in the water - up to 3 years);
  • beautiful decorative surface (with the addition of pigments can not only silver color);
  • excellent corrosion resistance;
  • quick drying.

have silverfish there are also some disadvantages , however, does not affect the properties of the coating.It is a fire hazard and a risk of explosion, so keep it away from any sources of heat and in a well-sealed container.

And, of course, safety.It is advisable to comply with the minimum protective measures when working with paint, protect the respiratory tract and the skin, and the room where you work on should be well ventilated, and it is better to paint at all on the street.

As dissolve silverfish yourself?

How to breed silverfish Before describing the process, it should be mentioned that the silverfish powders there are two types - PAP-1 and PAP-2 .They differ cooking technology.And plant powder can not only varnish , but varnish , necessarily synthetic.The main difference for both compositions are proportions, so look at how to dissolve silverfish.

PAP-1 diluted with a special varnish - BT-577, at a ratio of 2: 5 (2 parts powder lacquer 5).This ink can withstand temperatures up to 400 degrees Celsius and does not burn.The first is filled with powder lacquer and then poured in portions with careful stirring of the whole mixture, it is desirable to use a mixer.

PAP-2 can be diluted by any varnish, a ratio of 1: 3 or 1: 4 (1 part powder to 3 or 4 parts varnish).Prepare the paint and mixed thoroughly.When you connect the components, you will find that you will get a very thick mass, therefore, to use it irrationally.So look, how to make silver paint thinner.

Further, in both cases, the paint must be brought to a paint consistency, and depends on the degree of fluidity of the method of its application (spray, brush or roller).For thinning paint, a mixture of solvents or any one, should be used turpentine, mineral spirits, solvent.For spray to mix the paint and solvent (or mixture) in the ratio 1: 1, and for the brush roller - 1: 0.5.

We have already mentioned that the plant can be aluminum powder and synthetic varnish.Proportions are very different, so that the same can be used as the lacquer.Thus, you have a ready-made jewel, paint with their hands, which can be stored up to 6 months in this form.

Painting silverfish - you need to know?

The use of silverfish Dye need only personal protective equipment in a well ventilated area, it should be checked first.And now look at what you need to do to paint silverfish successful and covering long retains its quality.

  1. should prepare the surface well.The metal is cleaned of old paint, rust, dust and dirt, degreased.Wood tsiklyuetsya and oshkurivaetsya.
  2. paint applied in any manner in several layers, after each drying need.Primed surfaces require fewer layers, sometimes missing and one.
  3. If you still need to put on silverfish other coating, rather than on a clean surface, it is worth remembering that you can not paint over nitroemali, NBH and oil paints.
instagram viewer