Build Daily

Building Materials

August 12, 2017 18:08

How to choose wisely and pokleit wallpaper borders ?

click fraud protection

Borders for wallpapers: what is their purpose?

wallpaper press on the curb can be glued at the floor, the ceiling, in the middle of the room, dividing it into two parts, around doors and windows.The question arises - why do we need it, and what is its purpose?It would seem a small strip with a pattern, and can perform multiple tasks.Firstly, it is, of course, decorative function .A well-chosen curb able to add flavor to the interior and make it unique.

Border can significantly delineate the space visually increase or decrease it. For example, if your room is high ceiling, then glued on top of the strip profitable emphasize them.Well, to separate the two types of wallpaper in different colors can curb sticked in the middle.Secondly, it is also a practical function .The fact that most of the darker shades of wallpaper glue at the bottom, and light - on top.It is proved by the fact that the space near the floor more often and more quickly get dirty.

Types curbs

Almost all types of wallpaper supplied in the kit respective borders.They do not happen only in some cases, when you buy a monophonic or coating material for painting.So, let's look at what the whole there are borders?

Firstly, they are divided on size.The standard length of each roll is on average from 5 to 10 m. The width may be a few centimeters and meters.Secondly, they vary in pattern and color combination with wallpaper.As already mentioned, can be produced in a set in the same style.

Thirdly, produce them of the same materials.Paper borders are specially designed for paper coating.Also, there are curbs and vinyl, acrylic, textile, velor, glass-fiber fabric.Fourth, they are classified depending on the application .For example, wallpaper borders for children and for the living room will be significantly different.Fifth, in texture, they are smooth and embossed, made with gold, silver, and even lace covering.

Note! If you bought a coat, but still have not found the borders, then pay attention to three aspects of the same material, color, style.This will help to quickly make a choice.

How to glue paper borders?

you pokleit coating on the walls, and at the final stage, there was only a paper for wallpaper border.At the initial stage it is necessary to determine the order in which it is it will be (under the ceiling, in the center of the wall or from the floor).Next, how to inspect the place.It must be clean and dry.Any adhesive residue from the previous application of wallpaper will not be tolerated.If there is dirt, you can use a soap solution.

also should make sure (if you will be glued to the old coating) that there are no cracks, voids, holes and other defects.The second stage is diluted adhesive (the same approach that was used for wallpaper).The recipe of the mixture is indicated on the packaging.Then it is applied to the surface and applying borders.Thoroughly their smooth and remove adhesive residue with a cloth.If you bought a self-adhesive borders, it does not always look for their sticky basis.In any case, also use glue.When working with the material in the corners make sure that the bands went to overlap.

instagram viewer