Bituminous primer - a good foundation for floor screed

What bituminous primer?

Repair awaits each of us.Some went to this step for a long time, while others will face this problem suddenly.Whatever it was, but to know what bituminous primer for what it is and how to use it is to each owner.The very same primer is a so-called slurry material, which is called the oil bitumen.It is quite resistant to the temperatures and other influences.

like all created by man, bitumen primer for screed has its positive and negative sides.Many believe that the time of materials on the basis of bitumen has passed, but it is not so.

Studies show that bitumen accounts for a huge part of the construction market.On the basis of doing all kinds of waterproofing materials, insulation, and a large number of other materials.

By pluses bitumen can be attributed relatively low cost, ease of installation, it is possible to give the different states, and it is sold as a liquid (primer) and rolls (roofing material).It can also be mounted on its own without the involvement of professionals who take this kind of work for decent money.That is to say, a further saving of your money.By cons

bitumen include low melting point and fire, because the bitumen is made from petroleum waste, and the latter is known to burn just fine.

primer tie - preparatory work

Deciding to use bitumen, you should hold a series of preparatory work.They are not complicated but require a small amount of free time.The fact that the primer tie goes best on a clean, flat surface.

To do this we take an ax and cut off all the tabs, if this tree, otherwise the instrument will be different.We try to make the surface smooth.After cutting all the projecting parts with the help of a broom remove all dust and other debris far away and, of course, delete it.Now you can boldly say that the surface is ready for priming.

Bitumen Primer - Getting Started

The process of applying the primer on the tie is very simple.If you bought undiluted bitumen, then we dilute it with special oils in strict accordance with the instructions.If you have purchased a very ordinary, already diluted bitumen, then it will go much faster.Home gently open the container, be sure to wear long-sleeved clothing, as well as to acquire a medium-sized roller.

now begin to put asphalt on screed.This is done as follows: roll poppy in a container, and begin to paint our face.If it is a wall, the movement is made from the top down, and if it is, say, cellar floor, then applied primer is from the far corner, gradually moving toward the exit.Do not be afraid to leave the occasional drop.They will not interfere with, the main thing to do everything carefully.Here, as in the case of paint, it is necessary centimeter by centimeter to lay asphalt on the surface of the screed.Take your time and you need all turn out.

Do not forget that this primer quite sticky, so do not dip the roller into the tank for a long time.It is enough to dip it for a few seconds, and it will be covered with the optimal amount of bitumen.Hold it there minutes does not make sense, it is still more on themselves did not take.

filthy dust fresh bitumen?No problem.Simply click on the stain layer, a second time. strictly forbidden to smoke during application of bitumen .Explode it did not explode, but it can greatly harm your health.The fact is that during burning rather he releases poisonous substances that tend to accumulate in the body.This occurs only during combustion, in a normal state is completely safe bitumen.Here, perhaps, and all the secrets of primer under the screed.