How to cut off at an angle of 45 degrees

What you need to cut off at 45 degrees

In order to begin work on sawing at an angle of 45 degrees, it is necessary to prepare a number of tools and materials:

• Mitre.
• Saw.
• material for sawing.
• protractor.
• Simple pencil.
• clamp.

How to cut at angles:

Action Plan on Employment sawing at an angle of 45 degrees is composed of several turn-based events:

• Preparation angular pattern.
• acquisition miter box.
• Bond Mitre box.
• application slots.
• processing lumber.
• sawing process.
• Features sawing process.

How to cut off the angle of 45 degrees: step by step instructions.

Step 1: preparing a template for corner cutting

This tool is a profile in the form of an inverted letter P. On each side there are slots for sawing at an angle of 45, 60 and 90 degrees.More difficult angle miter box templates or have provisions for issuing sawing different angles.

Step 2: a better cut off a 45 degree angle - cut on the miter box

To the untrained wizard will help you in the purchase of finished miter box hardware store.In a domestic environment it can be made of three or planed plywood boards.

tool can be assembled by bonding between a pre-prepared parts.The box is necessary to fasten the angular pattern using wood glue or screws.Miter box side walls must be strictly parallel to one another.Horizontal beams should create strict perpendicular to the side.

Step 3: outline the slot at different angles to cut laminate flooring, trim, etc.

Application slots will affect the accuracy of the work performed in the future..Therefore, this process should be approached with particular painstaking.Propylene is desirable to make using the same hacksaw, which will be carried out the work.

Step 4: Preparation of material that must be cut off at an angle of 45 degrees

should be ready to fix the angular pattern on the desktop using the clamp.Next, the workpiece should be applied to the layout of future cuts.Next, you need to combine harvesting with a cut of 45 degrees inside the miter box and press firmly.

Step 5: sawing at a right angle

Hacksaw must be inserted into the corresponding slots of the angular pattern and cut it blank.The slots will limit the movement of the saw and propyl realized in the right direction.

subtleties of working with miter box and various

materials When cutting elements such as skirting is not always worth doing propyl 90 degrees.After all the walls in the room can be uneven.Before sawing plinth is necessary to adjust the angle of cut.

Thus, the article has been described and characterized, the process of sawing wooden materials via miter box.