Bat for the screwdriver - the weapon master repairs

Application for screwdriver bits

Externally bits for the screwdriver is very similar to a screwdriver and looks like it was cut off from the handle to be attached to the drill.

The main purpose of the bits is mounting and dismounting of the fastening devices by mechanical effects.Rotation is made network or battery motor.The most popular bat for the screwdriver tip Phillips is considered, because it is universal for various repairs.

As for the practical application, is indispensable screwdriver when installing plasterboard-structures that are widely used today in finishing, remodeling, repair and construction.For the installation of gypsum board to install more than 20 fasteners.Also screwdriver will be useful in the construction of wooden, metal, plastic and facilities for everyday needs.

There are bits and transient lengthening, whose task is to ensure that the tip access to hard to reach places and setting bits that are not designed for this particular model screwdrivers.

With special bits - Socket - You can also tighten / loosen the nut.

Varieties bit screwdriver

End bit in a twisting mounts

End nozzle for screwdriver bits looks like a hex nut with shank for drill chuck or screwdriver.

This tool lets you unscrew the nut, which is usually twisting spanner.Also, the use of nozzles is particularly useful when avtomobilemontazhe and repair cars.The nozzle can be of different sizes and is suitable for all kinds of connections.

Besides auto industry nozzle is used to set the house roof.In the process of roofing metal roofing and decking screws are fixed spanners with a drill or screwdriver.screw head size should be standard - 6-8 mm.

Important!All quality tools should be inside the head of a magnetic nozzle, which allows you to hold the screws in the device to avoid having to hold their hands.

slotted nozzle for screwdriver bits - similarity

screwdriver bits for cordless screwdriver is a full replacement for a conventional screwdriver in the house and allows you to twist the screws and screws of very different complexity.It varies depending on the slot size, which ranges from 3 to 7 mm.These dimensions correlate only for devices that run on electrical power.

Important!If slotted nozzle size is less than 3 mm, it is a sure sign that it is not intended to be used in power tools and is intended for domestic use, for example, paired with a packed screwdriver.

Today in the shops can be found dvuhnasadochnye bits that both ends are working tip.For example, on the one hand it will be slotted, and on the other - Phillips.

The photo can be seen the rod with six faces, that provides maximum clamping bits to the magnet in the cartridge device.If you look closely, you can pay attention to the cover of the rod, which consists of a titanium alloy and makes the nozzle for a long time to be in working condition.

Important!In order not to expose themselves to the danger of injury due to slip-off nozzles, purchase equipment and attachments in specialized stores with warranty card and a certificate of quality.Counterfeits of substandard metals can cost health.

Today, most certified and standardized in the manufacture of this type of device is the company "Bosch", which prepares the nozzle with a titanium coating that serves as the main reinforcement for long life tip.

Bit 12-bye faces

non-standard tip for the screwdriver bit is dvenadtsatigrannaya.

Scope of bits: the American automotive industry, which uses a non-standard nuts are not available in our country.However, if your home still has a car, you will have to buy a nozzle for repair.And in the standard set will be impossible to find it, so you have to book a bat in a specialty store.

Bit Delta - fancy hardware stores

triangular bit - as a non-standard and atypical for the screwdriver tip is used for mounting various devices of Japanese origin.

It requires devices mounted with maximum protection against unauthorized access.This nozzle is the most rare to find, and it is also worth ordering service centers.

Professional Review of nozzles for screwdriver can be viewed on the video in the next tab.

Good luck with the repair!