How to make the gate of corrugated board with his own hands , photos

Options

There are ample options of manufacturing of corrugated gate with their hands, as well as several options for combining different materials fences.

very common and, perhaps, standard variant - is mounting to corrugated metal frame.The second option is inferior to its predecessor in the simplicity of implementation and low cost, but winning in terms of design - the combination of corrugated board and forged bars.Such fences embodiment solves a problem with a viewable area, and the problem of appearance.Modern materials allow the color to emphasize the decorative forging successful and make a stylish and high-quality site fencing.

If we talk about the combination of corrugated board with other elements of the fence, it is worth noting that this stuff looks great in combination with stone, decorative tiles and bricks.If you plan to complete the entire fence of corrugated board, do not forget to use the decorative elements.You can also experiment with both the color and textures.Thus, you get rid of the barriers of monotony and will achieve the desired visual effect.

As you know, you have a place to roam in the field of design.Now let's talk about the technical part.Durable and high-quality gate you can make quite independently, adhering to our simple rules.

Making the gate with their hands

Step 1: Installation of supports, pillars

We need the steel columns with a wall thickness of 3 to 5mm.6 and the size is 8 cm. (8 or 8 cm.).The length (= height) columns is calculated in such a way that it is equal to the desired height of the gate + 1 - 1.2 meters, it is the length of which will be underground.

important to understand that just to score pole in the ground - is not enough.You need to dig a hole under each pillar with a diameter of 30-40 centimeters, put it in the post and pour concrete.Do not forget to use the level and remember that a 100% hardening of the concrete occurs only after 10-14 days.At this time it is not necessary to experiment with the strength of support.

Step 2. Make a frame

In order to produce the frame, we need a few details.This is a very solid and level foundation for the design and clamp fixing.For the base, you can use a sheet of OSB.Do not be lazy to do everything in this way, since the strength of the structure depends on the quality performance.

Prepare pipes for the frame of the same parameters as the support.On a flat sturdy base with clamps anchoring frame our future gate.Do not forget at every step of the level of use.

After proper markup - start welding.It is also welded to the side of the pipe frame hinges on which the gate will be held.The second part of the loop we fastened by welding to the supports.There is also a need to attach the frame plate, which will crash the castle.

Step 3. Fixing the base sheet

for attachment to the frame material we need screws and washers made of rubber.Pre-cut grinder under the dimensions of the frame piece of sheeting laid over the base and attach with screws.

not to deform or damage the facing sheet, we recommend to drill a small hole in it for the screws.

Also, we should think about the processing of corrugated edges and frames.We recommend that you choose a quality paint that will protect your gate further from deformation and rust.

Step 4. Merge design

Fixing finished wicket to the supports is carried out in 2 steps.First - you mount the gate to the post in any convenient and affordable way, it is possible to use large clamps welded to the second part of the hinge assembly supports the weak seam, after which a few times trying to open and close the gate.This process does not deliver any inconvenience.

Only after you have made sure that all is well - finally fasten the gate.

Castle at gate

So, we have done most of the work, which means that finishing touch will be - the installation of the castle in a special plate,we welded to the gate frame.In the second column of reference need to drill holes in the castle.

Completion

Last but not least, the bar - top blanking plugs supporting pillars.You can strengthen them by welding or insert decorative elements in them.

Now you have the gate, and if it does not, it soon will be obligatory.And remember, the only step by step execution of works, the lack of laziness, high-quality materials and a great desire - will lead you to the desired result.