Build Daily

Стройматериалы для дома

August 12, 2017 18:06

All deficiencies ecowool , especially installation and operation

Ecowool To reduce heat levels in buildings or individual rooms settling layer of insulation.The range of suitable materials is quite big, huge selection.Individual developers often prefer to produce surface finish ecowool, since these products are successfully combines high quality with reasonable price.

will not praise all its advantages compare with other samples.The purpose of this article - to consider the "cons" and determine whether they are relevant for certain conditions of use.To be more clear all the features of the use of this material and its shortcomings, it should be noted that ecowool - the result of the processing of cellulose waste with the addition of antiseptic compositions and flame retardants.Let's start:

disadvantage in mounting

  • wadding He is accompanied by dust, which identifies the material.Therefore, finishing work is carried out with the use of protective equipment.
  • enough loose material, and laying on a vertical plane is associated with certain difficulties.




Limitations

  • Ecowool has a low density.Surface finishes, which will affect the operation of mechanical loads (different floors, the system of "floating floor") is not practical.
  • On such a heater can not be put plaster composition as a layer will be destroyed because of the progress "the basics."
  • mats ecowool qualitatively quite difficult to cover the surface with a complex configuration.
  • good ability to absorb liquids makes inappropriate use of this material for exterior decoration of walls or in rooms with excessive humidity levels.In principle, in all places, where possible direct or indirect contact with water product, their use is not recommended without additional protective measures.And it is always associated with an increase in costs and time to the work.

ecowool

  • ecowool use for thermal insulation significantly reduces the ability of the base material to "breathe" (although there is also the opposite view).But if the quality of ventilation increased requirements, it is best to replace this product on any other.Or to provide the necessary clearance between the surface and ecowool, construction of additional air ducts and the like, which, in principle, only slightly increase the volume and complexity of activities.

warming

CONCLUSION

Yet ecowool merits of a lot more than the disadvantages, and in most cases the "cons" are not that significant.The main thing to take into account the specifics of the structure, all the details of finishing and, if necessary, to take a number of additional measures.

When handling vertical surfaces greatest insulation quality can be achieved only with special equipment (for charge).The use of mechanical means eliminates a significant shrinkage of the material.Therefore, work on warming ecowool desirable to professionals.

instagram viewer