Device toilet cistern with a button with bottom water supply , types of breakdowns and repairs

Knowledge of design of the device allows sanitary repairs is not waiting for the arrival of the master-professional.For those with the technique is still at the "you", but wants to solve the problem with their own hands, it is worth noting that, regardless of the material of manufacture, installation specifics, forms and other differences between the principle of all toilet cisterns virtually the same.

cistern button and bottom water supply is the most common device on modern models of toilet bowls.Their characteristics and functioning of the subject of this article.

number buttons - 1 or 2 - it does not play a big role.This design only affects the user experience in terms of water savings.Figures presented various mechanisms to float tanks with a button models toilets «FOMINAYA», «The way AB", "INKOER".

common is that the float moves strictly vertical.It is rigidly connected with a button which is pressed to initiate the discharge of water and with the valve (through thrust), its overlapping pitch at a certain level.

principle of operation of a tank with a button and a lower supply

Recommendation Service and Troubleshooting

fault Although the issue to the topic of the article is not directly related, but some things still worth consideration.After all, if the flushing tank device with a button interested dear reader, means the toilet there were some problems.Let's understand how to cope with them in the simplest and most common examples of problems.

Before starting the repair should be cut off the water in the toilet tank.This is understandable, as it is necessary to engage in dismantling the valve.All process steps are so simple that no problems usually do not cause.The main problem lies elsewhere - not everyone knows how the desired looks and where it is located in a cistern.So we understand, and help us in this photo and some explanations.

Removing

If you try to simply unscrew the button, nothing happens.It is free to rotate, and all.To remove the cover, it is necessary to press down the button, and only after that, turning the bezel (as is customary in such cases, counter-clockwise), you can unscrew it.

Shoe membrane

pollution leads to deterioration of the drain as the water flow from the tank toilet is greatly reduced.The main difficulty faced by most home craftsmen at its service or replacement - to determine correctly where the membrane.It is a constructive part of the siphon toilet tank.

To get access to the membrane, it is necessary to unscrew the nut at the bottom of the tank, which secures the trap to the drain pipe.Next - to remove it, remove layers and rinse under running water.

Maybe someone from the readers and help these schemes and recommendations:

More complex defects in the tank of the toilet, as a rule, does not itself eliminated, and made the dismantling and installation of new fittings.And there is no sense in this, given that the estimated price of the product - from 325 up to 1200 rubles (for some models imported toilet cisterns).If you purchase a removable membrane separately, it would cost about 220 - 335 rubles.

By the way, originally tanks with a button and a bottom water supply and were constructed - with the expectation that it was possible to produce modular product repairs, and do not spend time dismantling, identification of the fault and replace the defective part.

From drawings and photos of the above it is clear that structural reinforcement variants for different models of tanks to the button a few, and it is the lower supply.Therefore, the replacement is carried out on a "one to one".