How and what to cut ceramic tiles in the home ?

Ceramic tile is often used in everyday life, and sometimes there is a question of replacing the cover on the wall or floor tiles, or the repair of the surface.When laying ceramic tiles never get to lay the whole floor or wall space to lay them flat amount.Always somewhere in the corners of the wall there is a problem - the whole tile is not placed.The question arises, what to cut ceramic tile?

There are several ways how you can cut (or cut) tiles, with desirable to slice was as straight as possible.However, how would you and what kind of tiles (wall or floor) do not cut, there is a single recipe.Before you cut ceramic, it should be a good soak in the water.Moreover, it must withstand forty minutes to one hour, depending on the type of tile.

Methods for cutting tiles

Wall tiles well cut ordinary glass cutter.It is better to use a diamond - it will provide a straight edge on tiles cut line.Pre-need to mark the cutting line so that it was clearly visible.Under the tiles need something to enclose, in order not to spoil the surface on which stacked ceramic.

conducted along lines should be parallel to it to put a flat rail.She will play the role of "guide" for the glass cutter.Indent slats of features must be such that the cutting part of the tool accurately on line throughout the length of the tile.Please be aware that the minimum allowable offset from the edge of the tile - 1-1.5 cm

special tool is used to cut the tiles, called "Tile.".He makes the deep "pass" more tiles.This tool is also a tile breaks into pieces with the help of a special device right on the cut line.By the way, there are tile cutters and thinner, wall tiles.They are reasonably priced, but provide a very clean cut.In this instrument and a special restrictive strip, which provides the necessary size of the cut.

When you need to cut a few pieces of ceramic tiles, you can use the "grinders".But work with it requires certain skills.Masters used for cutting tiles and jig saws with diamond string.There are spetspilki for saber.In an extreme case, it is possible to cut the tiles and ordinary hacksaw, although this process takes a lot of time and nerves.