How to drain the water from the washing machine : the water does not leave the washing machine drains the water forced

If you decide to stop the washing machine with a tank filled with water, often it is necessary to drain the water force, orwith opening doors for you will rush the flow of water.The easiest way - to put the regime "Spin" at which water begins to coalesce.You can then turn the washing machine, and you can safely open it when you unlock the door.

Failures related to drainage system - a common problem in the modern washing equipment.This article will tell you what to do if after washing water is not running out of the tank.

reasons for such problems are varied:

• team set incorrectly.Check the setting: you might accidentally press the wrong button, and the device performs a task in which the water draining is not scheduled.
• drain is not incorporated in some programs.Check that you do not specify one of these modes (for example, "wool").
• Blockages - the main cause of problems with the drainage system.Make sure the hose terrain through which the drain is conducted: there could get debris.Sometimes the cause of the problem lies in the filter drain.Masters regularly find there buttons, pins, coins and other little things.
• drain pump (pump) is also subject to clog.This issue is determined by ear: it is characterized by the roar and crackle of appearing directly before draining or squeezing laundry.
• Garbage can score and a short tube that connects the drum and the pump is responsible for draining.
• kinked hose.Check the drain hose.It is possible that he had a kink.
• Faulty pump.If the pump does not give signs of life, it will have to be replaced.Installation of this part Rely on professionals.
• Damage Control Module.Each automatic machine built an electronic "brain", responsible for the operation of all its components and elements.Often the cause of the problem lies in its failure.
• problems with water level sensor.In this case, it is wrong to fix the liquid level, defining it lower than it actually is.This happens in cases where the weight of the loaded laundry exceeds the norm.
• technical failure.Problem with drain often caused by wear and tear of the equipment: check for damaged if one of the sleeves, or if the motor winding burned.
• Incorrect connection to the sewer.The problem with leaving water appears if the drain hose is not properly connected to the sewer.In this case, can not do without the wizard.

In modern washing machines each mistake or failure is indicated by an alphanumeric code that appears on the display of the technical device.

problems with drainage from the washing equipment of various brands of the following codes:

• the Samsung machines - E2;
• at Zanussi devices and Electrolux - EF1;
• vehicles for washing Whirlpool - F03;
• at the Ariston and Indesit machines - F05 or F11;
• from product brands Siemens and Bosch - F18, d02 and d03;
• washing machines of the brand Beko - H5;
• in hardware made LG - OE.

Before looking for causes of problems that may Disconnect the washing machine and drain the water from it;amount of liquid inside, sometimes reaches thirty liters.Depending on the type of technical device, choose the most convenient way for you to get rid of the water.

In the lower part of the body locate the emergency emptying hose, place it in a bowl (or other low capacity) and remove the pressure relief valve.Drain.Then open the door and remove the laundry;pressing it will be on their own.

If emergency hose in your washing machine is not, drain the water through a special filter, located in the lower part of the body and represents the opening of the round form.Sometimes it covers a small panel.Slightly tilt the body back and fix.Place a suitable container under it and gently open the drain filter by removing the lid effortless and sudden movements.If the filter is clogged in such a way that the open it is not possible, you must get to the drain pipe connecting the drum to the pump and drain the water through it.

For vehicles not equipped with reverse relief valve, the following method is effective: for 3-5 seconds to post the drain hose a little water and then place the free end of the hose into the tank located below the tank level.The difference in pressure will result in movement of fluid and the drum empty.

Visually data pomotrite water drainage ways you can, in the following video.

in homes without central water supply and sewerage systems are preferred old-style machines, which belong to the type of activator.The water in these devices is poured over the top, and is drained through the drain hose is located at the bottom of the housing.

Remove the water from the reservoir activator machine in the following ways:

• tilting structure that the liquid flowed over the edge;
• using a pump;
• bailed out the water bucket or other suitable utensils.

rid of the water, looking for the cause of malfunction.Start with the drain filter.Clean it from dust and wash.Inspect the pump, it is placed directly under the filter.If the pump is not blocked, return the filter to its original place.

Explore the drain hose and the siphon.Place one end of the hose into an empty container and start the spin cycle, or install a water drain mode.The advent of liquid indicates that the cause of the problem lies in a faulty drain.If water remains inside the device-problem in the machine units.

obstruction pipe, which connects the drum pump also entails draining the lock.In this case it is necessary to disassemble the machine, clean all of its connectors and check the status of the drain pump.

If the cause was never determined, explore the control module.Using a multimeter (tester) to check the presence of a voltage.If the electricity supply is disrupted, the electronic unit will have to be replaced.This complex process requires skill and special training, so the self is not recommended to change the module.

attentive host detect a failure in the device long before the flood waters gush from the open hatch on the floor.There are a number of signs that speak of the violations occurred in the drainage system.Often a fault signal change in sound operating device: through the usual buzz you hear the murmur of flowing water.Another clear sign - liquid remains in the tank even after the pressed linen.

However, most of us are not following the progress of the wash, so the frequent cases where problems with water discharge unnoticed, and "flood" caught by surprise.Do not lose self-control, as soon as possible, close the door and collect the water from the floor.Disconnect and drain the equipment available to you way.