Washing machine does not heat the water : the causes and what to do

To a linen washed away all the dirt and it has acquired the freshness and purity, should be washed in warm or hot water - it knows every woman.Fortunately, for a long time in the past are the days when the wash water had to be boiled in large metal pots.Today, it heats the water, washed and spun linen, our irreplaceable helper - washing machine.

Sometimes, however, as a result of any fault, the unit suddenly "refused" to heat water.With what the problem could be related, and how to cope with it, see below.

would seem the most obvious way to determine at what temperature is erased underwear - a touch things immediately after the machine completes the washing cycle.But this is not entirely correct, since in most cases svezhepostirannoe underwear will be cold.The fact that the washing machine heats water directly to a wash and rinse the laundry takes place in cold water.

Washing machines from the most popular manufacturers, such as LG, Samsung, Bosch, Zanussi, Atlant, Indesit, Ardo, as a rule, no longer to heat the water by one of the following reasons:

It happens so that the water in the washing machine is heated, very slowly, so that, after quite a long time, the hatch door glass after the start of the wash is still cold.This, insignificant at first glance, the problem can lead to quite serious trouble.Poor wash out clothes - it's a shame, but that's not all: as a consequence of the slow heating failure PETN or programmer may occur.

• If your washing machine is operated for more than 7 years, most likely, most of the problems in the work connected with the TAN.The quality of tap water we have left much to be desired, so the term of service is significantly reduced PETN.Experts advise to replace the item as soon as the first problem.
• Current models of washing machines are equipped with the function of forced hot water (as its start, read your owner's manual).At malfunction of the thermostat, this function will help some time without replacing the water temperature sensor.
• One of the indicators that stiralka does not heat the water - a musty smell to wash things.He does not always appear, but if you notice it, you first need to test the heater on serviceability.
• In order to extend the life of the tubular heating element (it is with them most often associated interruptions to heat the water), you must use only high-quality washing powders and not to exceed the dosage of cleaning and care agents.If you are concerned about the quality of tap water, set the flow filter to reduce the level of hardness.