Aluminum ceiling with his hands

When the need for quick repairs of ceilings, the use of an aluminum rack design becomes the most appropriate.Installation of this version of the ceiling does not require special skills and knowledge that allows it to produce by reading only the manufacturer's instructions.The entire assembly process is reduced to the installation of the support frame, which is fixed on aluminum panels.For information on how to make aluminum ceilings with their own hands will be discussed in this article.

What are the distinctive features have Pinion aluminum ceilings

looks ready rack ceiling as a single flat surface, but consists of individual strips.They may be of various sizes and colors.This allows the use of a composition different design solutions.Cassette aluminum ceiling looks different.Its often used in public buildings and offices.Its surface is assembled from square or rectangular tapes made of aluminum and having a different relief.

Today, the most popular ceiling systems have earned just two configurations:

• Possessing completely smooth surface.They are made of panels of the same type, leaving a minimum gap therebetween.This is the easiest installation method, which leads to the creation of a practical, but not very spectacular ceiling.
• created of alternating sections of different configurations.Thus slats may have a different color.There is an alternation: between the rails of the same color on the other elements of the set, often contrasting, light range.This ceiling looks very stylish and original.

straps that create a ceiling surface, fixed on a special guide rails, called combs or traverses.Each bus is equipped with a bottom bracket, having a shape that matches the configuration panels.This device greatly simplifies the installation of the ceiling and makes it feasible for everyone.This system eliminates the use of additional fasteners, for just snapped strap installed on traverses.

But before you resort to the installation of panels, it is necessary to set the comb plates overlap.This is done in two different ways:

• When suspensions aid - used in sufficiently large indoor area.
• in a small room (toilet and bathroom) can be put in the tire mounting brackets, which are attached to the walls around the room.In this case, the comb fixation on the ceiling is needed.In this case, a little more complicated to mount the panels themselves as displacement traverses may occur.In addition, under the weight of the tire structure can sag, breaking the geometric parameters of the ceiling.Therefore, this method should be used only when the room width of less than 150 cm. In other cases it is necessary to use the first method for mounting ceiling using aluminum hangers.

Advantages possessed Pinion aluminum ceilings

If you make a comparison with the other suspended ceiling systems, we can notice that aluminum ceilings in many ways ahead of its competitors in the main technical parameters:

• aluminum slats have good resistance to the adverse effects ofout, including high temperature and high humidity in the room.This feature allows you to safely construct the ceiling of such a plan in the kitchen in the bathrooms, as well as in industrial environments with aggressive environment, where other options simply can not be used.
• acquiring all the necessary materials and using simple hand tools, aluminum ceiling, you can do yourself without any special tricks.

• Since aluminum strips can be bent in a fairly wide range, they can be completely set up and on curved surfaces.This makes it possible to construct even a tent and dome-shaped design.To do this, guide rails mounted on different levels, creating the necessary framework configuration.This will ensure the reliability of fastening and hide elevation under the smooth lines of curved strips.

• huge consumer value has aesthetic appearance.Manufacturers of paint, aluminum rails are very high quality and resistant powder coating that provides decorative beauty and durability of the coating.The palette of colors is so wide, which makes it possible to choose the necessary color for almost any interior.

In addition, aluminum is quite environmentally friendly metal that does not emit harmful fumes.The oxide film formed on the products creates a natural protection against all types of corrosion and covered with paint, and it does provide a full guarantee of durability.

as a kit Pinion aluminum ceilings

Before you begin to install suspended ceilings, you need to buy everything you need for this.It is usually available in the kit:

• is fixed on the perimeter of the room starting profile.Required for its mounting on a level line on the outline walls.
• Depending on the size of the room will require a certain amount of combs or traverses.These mounting rails are mounted on suspensions or the corners of the walls.
• finishing profile, which is the rack itself.These elements closes the entire surface of the ceiling.The width of these strips is usually 100 mm.
• required for connecting the main rails reinforcement plates.Not all models are available, but if the ceiling give greater originality.

• Pendants made in the form of plates or metal rods.They are needed for the installation of the entire skeleton of the building floor slabs.If you are going between the floor slabs and false ceiling makes the distance no more than 10 cm, suitable plate hangers.For longer distances, the best solution seems to use rod hangers with springs
• Furthermore, such fasteners need as dowels or screws.
• not do when installing a suspended aluminum ceiling recessed luminaires without.

Besides all these structural elements of the suspended structure and require some tools:

• Building fluid or laser level and a tape measure - they come in handy when applying markup.

• for making holes for fasteners need to drill or punch.
• more convenient screwdriver is needed to connect the frame members together with screws.
• should definitely get a pair of scissors for metal, because constantly have to cut rail.

acquiring all of the above, you can proceed to the actual installation of hinged aluminum strip ceilings.

Implementation marking the future ceiling

Before starting the installation work, it is necessary to prepare the surface, which will be mounted frame elements.The condition for quality installation is carried out correctly marking.It determines the level of the ceiling.Minimum indent from slabs of 3.5 - 4 cm, and the maximum can be anything.It depends only on the length of selected suspensions.According to the chosen level throughout the perimeter of the room held a closed line on the walls.It will serve as the main reference point for installation.In its application should be checked periodically and the horizon line every 1.5 m distance to the floor.

After this markup is applied to the floor slabs.The number of lines that you want to spend on them is equal to the number of traverses used for the construction of the frame.The first wall of the comb should be located at a distance of 40 - 50 cm from the wall.Between two neighboring mounting rails make a distance of 100 -. 120 cm This step ensures optimum mounting stiffness of the whole structure.After the marking begin to mount frame, and already it aluminum slats.

installation rack aluminum ceiling system

production work on the assembly carrier frame river aluminum ceilings carried out in stages.

First, by securing the perimeter of the room delineated starting profile.It is applied directly on the line and hold tight.The second person using the gun drills holes for the dowels.These holes should be done at a distance of 50 cm from each other.

Secondly, inserted in holes drilled dowel made of plastic and are fastened on the starting profile.It is best to carry out special mounting screws for rapid installation.They just need to drive and do not twist as ordinary.

Third, by incised lines on the ceiling at a distance of 50 cm from each other at the same dowels install hangers.They will be mounted traverse.

Fourth, the initial profile is attached to the cross traverse a given distance from each other, keeping them parallel and previous relevant lines on the ceiling.Under the supervision of the construction level attach them to the suspension.There should be no sagging.

Fifth, rack and pinions collect ceiling structure.To do this you must measure each rail and cut to size.By cutting the line just made a shallow incision with a knife or an awl.The edges of the strips cut with scissors for metal and breaks off the rail.The panel is raised and simply snapped on the steering traverse with regular fixtures on it.The ends of each rail lead into the starting profile.Intermediate inserts do not forget to install between the main rails.Last rack may not be suitable width.In this case, it must be cut along the direction.Cropped portion is still inserted in the profile, so the irregularities will not be visible.

Sixth, set in the lighting design and connect them to power.For this purpose, before the inside of the frame assembly is necessary to lay the wiring to the right place.Under the lights themselves are drilled directly into the desired diameter rails.

Installing rack ceiling aluminum is not difficult.It is the power of anyone who knows how to handle the tool.If the show imagination, it is possible to build a multi-level ceilings, and of aluminum slats.