Why do I need to put on the site of the shelter for the pool ?

Which cover for the pool to choose?

Pure Water, lays aside hundreds sunbeams when the wind picks up light ripples awakens a desire to plunge into the coolness, to escape the heat.However, the same wind enters into the pool very different debris from leaves and ending with different winged insects.If you have no desire to constantly clean the water, get a cover for the pool.The choice should be made on the basis of what type you have the capacity for water treatment.It can be fixed, made by pouring concrete into the pit, modular framing, or inflatable.There are separate models entirely made of metal or plastic.

roof for the pool must comply with it. For stationary mounted permanent pavilion design for an inflatable or a precast frame mounted mobile canopy .In order to hide the baby in the bath from the scorching rays of the sun, and easy enough for folding the tent, which is often used for outdoor fairs.However, this is a temporary shelter and is only suitable for fast retractable inflatable containers of small dimensions.Much more interesting are the pavilions, which species we consider in more detail.

Covered swimming pool - shelter from sun, rain and even snow

Some people love to swim, but walruses recorded in no hurry, because the uncomfortable feeling in the icy water.How to be, not to abandon the pleasure to organize swims at the pool, even in the late autumn, and then winter?It's simple - you need to put an indoor pavilion, frame type.This can be an entire room, with sliding walls and roof sections (telescopic version) or collapsible frame to pull on him a woven pouch.

Separately can be considered inflatable hemisphere (including extended), by which can take refuge from the harsh frost tanks large sizes.Heat under such domes perfectly preserved, the entrance to the vestibule is closed tightly with a zipper.The most interesting version, of course, the pavilion, this type of design can be attached to the wall of the house, to a high concrete or brick wall, or may stand alone.

frame dimensions are not restricted, as it consists of separate sections, each of which represents a frame with glass (available tinted, or opaque).If necessary, part of the walls and even the roof can be removed and turned into a fully enclosed canopy pavilion for the pool.A small frames with transparent tensioned fabric are of interest as a holiday option for inflatable vessels.They are more like a garage-shell, and just as well fold and form similar.

Tilt pool - the last line of defense

child put a swimming pool, and the child is happy, so that it is a pity to clean the bath with cool water in the day, leaving for the night, under a canopy or a large garden umbrella, and quietly gosleep.And in the morning we find that the water covers the unpleasant film of dust and mosquitoes.Sometimes, when the wind rises, and the canopy does not protect the water from pollution, therefore it is necessary not to forget about such a necessary accessory, as an awning for the pool.This is not the same as disclosed above it in the form of a stretched fabric on the supports.Rather, it is a kind of cover that is pulled tight on the board.

Awnings much easier to put on frame pools, due to the rigidity of the boards, while the inflatable tanks can be deformed if the stretched material builds up water by pushing it in the middle and creating unnecessary tension.

I must say, these tents can be purchased not only for the inflatable tank, but also for the usual large stationary.The main thing is that his side even slightly raised above the ground.Sometimes the cover pool is not fixed to the walls and to the special-stretch marks pegs driven into the ground by means of silk cords.In this case, the purity of the water will depend entirely on the quality of the material tension.The most reliable cover - frame made for the type of pavilions, that is pending in the pool sections that are mounted on rollers.For the latter, on the side of the tank rails are laid.