Build Daily

Equipment And Tools

August 12, 2017 18:07

How to cut tile - we consider the different situations

How to cut tile or look for answers in history

Initially, we suggest to familiarize with general information on the material itself, its history, types and production technologies.Annals of ceramic tile has a few millennia.She has graced the palaces and temples of the Roman patricians of ancient Greece.Masters of Time brilliantly mastered the art of creating a huge mosaics and wall ornaments.

We are not known, what tool they used, but we can say with confidence: how to cut the floor tiles, they knew and were able to do it.During its long history, the mode of production of ceramic products practically has not undergone any major changes.As in ancient times, the tile is made from a mixture of clay and sand, with the addition of a number of special components and subsequent firing.

Due to technological peculiarities of production and natural components, it is durable enough resistant to high temperatures and is considered environmentally friendly finishing materials.

Things to cut tile - types of tools

Modern industry produces several types of tiles:

  1. Bikottura - produced with the use of compression, and then double-firing.
  2. Monokottura - the technology of its production is the same, only the final stage of production of tiles fired once.
  3. Gres Fine porchellanato or granite .Initially process feedstock is compressed and sent for firing.After oven finished products are subjected to machining.

When decorating ceramic surfaces quite often to complete rows or bypass tubes using small pieces of material.But how to cut tile, and it does not damage the surface?Proceed directly to the question: what can be cut tile?To begin with a look at the tool that is used for this purpose.This can be:

  • angle grinder;
  • electric tile cutter;
  • stone cutting machine;
  • glass cutter;
  • special clippers;
  • electric drill.

How to cut tile - study techniques

begin with how to cut tile glass cutter , because it is the simplest and most commonly used method.It is necessary to remember one rule: before cutting the tiles should be soaked in water for one hour.Next pencil on its surface is applied to the cut line of the future.This method is useful if you need to cut a strip wider than eight millimeters.

incision is made carefully, without too much pressure on the tool - right on the applied line.When this material should be on a flat surface.In order to break off the severed portion, tiles stacked cut line along the edge of the table.Then be careful to click on the slack side.This method is suitable only for wall tiles.

Then take a look at how cut floor tiles , and what tools necessary for this purpose.For this type of work is usually used the machine for cutting stone.Tiles fixed on the surface of the disk device and is cut from high strength steel with a diamond abrasive.In its lower part is in the bath water, so the cutting process is almost free of dust.

Now on sale you can find tile, whose surface is convex a wide range of configurations.This finishing material is a widespread demand.Methods for its styling, we will not touch, but how to cut a relief tile consider further.Basically, this is used for an electric tile cutter.It can help you cut narrow (up to 5 mm) strips.The machine consists of an electric motor, a circular saw with a diamond-plated bath water.

tile is fixed on level ground.Next, on the surface of tile disc incision is made, and breaks off the desired part.Sometimes when laying tiles required fragments oval or convex shape, so the question arises: how to cut tile figured ?To give it the necessary outlines using angle grinders, equipped with a special range.

instagram viewer