Build Daily

Equipment And Tools

August 12, 2017 18:08

Manual tile cutter for porcelain tiles : the rules of work with the instrument

click fraud protection

What is this tool?

Handmade Tile - is the construction tools required for cutting plates in a straight line.Some instruments are equipped with "Ballerina" - an element that allows you to cut round holes.These tile cutters have become quite popular, thanks to a convenient and high-quality work and quite a low price.It consists of a tool platform base on which are mounted guide tubes, in which the moving member moves.

This simple design ensures high cutting quality.In general, the need for cutting granite quality unit, because on the scale of hardness this material has a rating of 9 possible tiles 10. Tiles made, for example, it has a hardness of 6 units.

cutting element is a roll of the solid formulation, exactly the same as that of glass cutter, but larger.This roller copes with work on tiles and ceramic granite.The question may arise: How does the tool for cutting the material from the cutter for ceramic tiles?The answer is: almost nothing.The only difference is the thickness of the cutting element.

Note!There is a general rule of thumb when selecting Tile: the thicker the tile, the more powerful and should be thicker than the diameter of the cutting wheel.

unique device and its application rules

dealt with how the tool can carry out cutting granite, you should learn how to perform this process.Below we look at how to cut stoneware tiles in different ways.

The first option - the use of manual tile.This is the most convenient and easy tool that allows you to divide the material into parts.Tile is mounted in the device for a wheel is cut and notch breaks.The advantage of this type of work is the speed, simplicity and relatively low price.The disadvantage is that in this way is impossible to cut the strips at least 6 millimeters thick.Also, all the cuts obtained highly uneven and require further treatment.

should take into account the basic rules:

  • cutoff line should not be within 0.8 cm from the edge;
  • incision is made just one.

Another way to cut granite - is to use a glass cutter.This tool is held in the hand and is directed in any direction.It is needed for small one-time amount of work, when to spend money on Tile does not make sense.Advantages of this method are obvious - speed, simplicity and low cost.It is also apparent and cons.

Large amounts of glass cutter works very hard to carry out, as the job requires always be focused and ensure that the cut is passed on the desired site.In addition, it is difficult to cut granite, have to handle several times at the same place. Note! Before using tiles is desirable to cut the practice "rough" material.

Working with power tools

Now consider how to cut the tiles of granite with electric instruments.Naturally, electrician simplifies operation, and it is faster and easier, but at the same time as, and is more expensive.So, cutting Electric tile.It is used with diamond disc.Its slits are straight and slightly curved sides, in contrast to hand tools cuts.

undoubted advantage is the quality of the work, the opportunity to receive the strip less than 5 mm and work with the material of any thickness.Another plus - it is the purity of the procedure being performed, because all the dust settles in a special tank with water.By cons should include the high cost of this method, the need to strictly observe the rules of safe operation and always monitor the presence of water.

Important!Water is very important for power tools, because if it runs out, the blade becomes blunt.

Another great way to do the job - is to use grinders.This tool cuts less accurate and leaves jagged edges.That is why the Bulgarian is considered "rough" version.The advantage is considered to be that for a grinder does not need any additional training, just go on and cut.The disadvantage here is slow and a large amount of dust and chips while working.Keep safety glasses, earphones, and be very careful.

instagram viewer