Build Daily

Building Materials

August 12, 2017 18:08

Do stemalit Suitable for exterior finish at home?

click fraud protection

Stemalit: production technology

In general, the production process of the material can be divided into four stages: 1) glass Cutting and processing of its edges with the help of special equipment ;2) Topcoat application under appropriate conditions;3) Drying the finished product ;4) Hardening .And now, describe in detail all of these processes.Thus, at an early stage in the mechanized cut table material.Next, using the sheet edge grinding wheels blunted.

Make it to the process of heat treatment decreased the number of glass breakage.Before the direct application of enamel clean sheets in the washer-dryer.On both sides they are constantly sprayed with water containing a degreasing components, and wiped the brushes.Next, they were dried with a fan.And only then begin to apply the suspension of the enamel, which is made of dry paint and thinner.Coated material using a spray machine.

Then it all, hot-air dried and put in the oven for hardening.Temperature therein may range from +650 to +700 ° C.Glass removed and harden in a vertical position with cold air.Blowing lattice contributes to its uniform distribution over the surface.After cooling, the material is placed on a pyramid.In the finished glass produce curvature control, linear dimensions and other parameters.

few words about the characteristics stemalita

In fact, this material - it's one-sided colored glass.That is why it is so popular in the decoration of facades.From the outside, a feeling of uniformity.When turned off the light in the room from the street you would not understand, where conventional glass building, and where stemalit.Minimum sheet sizes up 200h250 mm, and maximum - 1260h3000 mm.

they are issued both color and colorless.Moreover, the enamel can be applied discharged way to create the effect of a continuous or etched glass, over the entire surface.More than 120 shades.

Stemalit withstand temperatures up to 700 ° C.its density is 2500 kg / m3 and the flexural strength - 25 kgf / mm2.This is 5 times higher than ordinary glass.In addition, it is isolated heat resistance, resistance to weathering and safe destruction (ie the material does not harm humans).

Glass stemalit: scope

this material is used not only in construction, but in many other areas.It is used for interior and exterior decoration different plan, create partitions, commercial equipment, facade glazing, production of doors.It is often added in the triplex, for example, in the manufacture of glass floors, steps and many other designs.Furthermore, stemalit widely used for decorative purposes.

You can often find them lined the walls of industrial and public buildings.A wide variety of architectural projects made with these glazing systems.They allow you to visually align the sections.And stamped upon them fluted, patterned or smooth texture creates a unique design.In the inner interior especially popular marblit (view stemalita) having a greater width and with different shades of iridescent highlights.

instagram viewer