Build Daily

Building Materials

August 12, 2017 18:08

Primer in cans - do the work more efficiently

click fraud protection

Primer-Spray - a storehouse of practical

primer in the form of a spray is probably the best choice for beginners gruntovschikov who want to protect a certain surface from external influences, or simply align it.It is a tank, which collected need for chemicals during the spray forming a necessary layer of the finished primer.

This material is not perfect, so is not without drawbacks, but it has lots of advantages.Let's start with the positives, the benefit of their missing.The first plus - easy and that is not unimportant, uniform spray , which is necessary for work, when the number of free hands is limited, and work needs to be done quickly and efficiently.

second plus - versatility .Primer-aerosol cans ideal for both interior and exterior work.In general, the material is quite versatile.

Third, and very important advantage - a good opportunity to level the surface .Such primer perfectly aligns the wrong place, the main thing is not to hurry and to closely monitor the spraying process.Also this primer dries very quickly and considerably improves resistance

surfaces from destruction under the influence of various external factors.

A huge popularity this primer is received because it can be applied in the most remote places that most will simplify your work and reduce the time to work to a minimum, as a hard-to site may take you a few hours, and then - "zilch"and ready.

primer in cans - start working

Deciding on the application of a primer, you should perform some preliminary work.They do not require special skills, but take some time.First of all, you need to clean the surface of all kinds of impurities and imperfections in the coating, such as rust, dust and grease stains.This is done with sandpaper, vacuum cleaner and degreasing fluids.

Additional steps in the preparation depends on the nature of the material being processed.For example, if the tree needs to process, and it is not polished, it must be sanded and then thoroughly cleaned of dust appeared.Now you're ready to work, now to business starts primer spray.

Primer Spray - secret work in the simplicity

After a full cycle of preparatory work and the selected primers, you can proceed to its application to the surface.To do this, open the can, it is quite normal, as we use every day at home and cosmetics, so the problems with its design should not be.

Before working strongly agitated tank, it allows you to do a better consistency of the primer that will speed your job and improve the properties of the primer.Intensively coward balloon up and down for 20-40 seconds.

Now it is time to spray onto the surface.This is done from a distance of 25-30 centimeters, which provides an ideal primer layers.Do not forget that the primer is applied from the top down, in order to avoid sagging.Press the button on the can, and even, rotational-translational motion, apply it to the surface.

After the entire surface is coated with primer, wait 30 minutes and start to apply a second layer.It must be more subtle than the first, so to speak, roughing.Its application takes less time, but it requires more care to more accurately trim the surface.

After that, proceed to the application layer of the third, finishing layer.It is also 30 minutes after the second.It is uniformly applied, in one approach, after which look out for irregularities and fill them with additional primer.That's the whole secret of the correct primer of the cartridge.

instagram viewer