Decorating the bathroom PVC panels - benefits from the material process technology

Why is this stuff?

installation PVC panels in the bathroom is particularly prevalent, thanks to the easy installation process, which allows you to spend a minimum of force, and thus there will be little dirt or dust.So, to make laying tiles should prepare the walls, clean them from old materials.Doing repairs through panels, no special preparatory works do not need to perform.

Repair using tiles can often take several weeks, and PVC lining bath panels takes place, a maximum of two days.A very important plus for the people doing the repair yourself - is no need of thorough skills in the use of tools.On the market there are a huge number of various colors and shades of the panels, which makes it possible to choose them according to your designs on domestic interior bathroom.

You can also use a variety of mirror panels or simulate any material.Moreover, finishing the bathroom PVC panels, a video of which there are many on the Internet, will allow you to better understand the installation process and find an idea for the design.

Tip!Previously it was not possible to do the installation yourself, then see the various video tutorials, they will help to understand and master the process.

Last preparations

Before the deal with how to sheathe the bathroom PVC panels, you need to know what tools will be needed in the process of implementation.This will require a drill, hammer, level, jig saw and hammer.Materials that are useful in the work: pieces of wood, screws, nails, dowels.It is a necessary tool set.All tools are easy-to-use, and having a minimum skill of working with them, you can easily mount the panel.

Note!Buying plastic panels, make sure as material, check all permits and certificates.

doing installation, pay attention to the following factors: fasten the bars to the wall is necessary with special care, as they should be equal to each other.To keep things exactly and correctly, we strongly recommend you to use the level to check the horizontal and vertical directions.If the approach to this issue is irresponsible, the curves of the bars will be prevented from doing smooth installation.

installation process

Finish bath room PVC panels requires a clear count the number of panels to do the job.Their width of 250-500 mm and a length of 2.6-3 meters.Based on these data, count the number of make necessary material.You should also not forget the joint profile, moldings, which is used for decorative transition between panels.If

finish bathroom panel PVC is expected in the room with uneven walls, then fasten panels on a wooden frame better.It is also necessary, if the walls in the bathroom constantly wet due to poor ventilation.On smooth, dry wall material can be installed without the frame.To make use of its bars 10-20 mm thick.The vertical rails are fixed with screws in increments of 50-70 millimeters.Top mounted three horizontal slats: top, bottom, and strictly in the middle.They must be strictly parallel to each other and on the same level.

Note!Due to thermal effects on material in indoor better mount panel with a small gap.

installation PVC panels in the bathroom in the following order:

• Metal holders are inserted into the joint edge;
• Then they nailed to the frame;
• are inserted panel.

So is the whole bathroom renovation PVC panels.It is important not to forget the moldings.For angles applied external and internal connecting profiles.