Antifungal primer for walls : types, manufacturers , application tips

Types of fungal primers

The most common alkyd, acrylic or mineral compositions primers against the fungus on the walls.In such a framework are added fungicides that do not allow harmful microorganisms to grow.Often, their action is not highly directional antifungal, but also anti-bacterial, antiseptic.However, if you are primarily interested in the fight against mold, be sure to read the description of the preparation: not all antiseptics can cope with it, some are designed only for pests and bacteria.

Select antifungal composition is depending on the type of surface.Floors, walls and ceilings may be made of concrete, brick, wood and other materials.The greatest effect will be achieved only if the vehicle is designed for your material.Fortunately, anti-fungal primers are made for all possible materials:

• for concrete;
• wood;
• for bricks;
• plasterboard;
• for styrofoam;
• for plaster or putty;
• for cement plaster.

antifungal primer on modern manufacturers

Consider the most popular varieties of antifungal agents on the market today:

1. «Milkill» - means with deep penetration, used often for materials with small pores and a poor ability to absorb(concrete, brick, etc.).The manufacturer recommends to apply the composition in 2-3 layers.Suitable for use in areas with consistently high humidity.It has antimicrobial properties.
2. «Acryl Grundierung» from the company OLYMPIC - antifungal acrylic primer with a unique ability to reduce the quality of surfaces to soak up moisture.

   

   Attention!It should be understood that the antifungal primer - a means of prevention rather than solving the problem.They are applied in order to prevent the appearance of fungus, not to get rid of it.For active combat mold using other means - Concentrate to remove mold and mildew.

3. «Ceresit CT 99" - it's just such a concentrated solution.He will cope with mold, overgrown by fungi, moss and lichen, and thus remains safe from an environmental point of view.The tool penetrates deeply, even in poorly absorbent surfaces and permanently eradicate the problem.You can use both indoors and outdoors.
   

   Attention!The concentrate is sold in bottles 1 liter, but to use it in its pure form is dangerous to health.Be sure to dilute it with water according to package directions.

Tips before applying the antifungal primer on the surface

There are nuances wall treatment, ceiling and other surfaces at home against fungi and molds that will do the job more efficiently:

• Do not spray directly on the fungus - it will reduce theits efficiency.Pre-rinse all vegetation from the walls with a solution of bleach or white, using a stiff brush life.Wait until completely dry and weathering chlorine, and only then proceed to the processing of concentrate.
• concentrate, of course, penetrates deep into the plaster, brick and concrete, but it is better to help him cope with the problem and after weathering much chlorine warm wall with a soldering iron or hair dryer building.Since the action of antifungal agents can significantly last.

sure to get rid of mold in the house, because it can become a serious threat to the residents and the strength of home health.Treat the walls at each repair, and remember that prevention is always more effective than active struggle.