How your hands and cover up the furnace than to keep it cracked .Clay or solution .

What materials should I use?

now on sale, you can find anything, because the building has long passed into the category of a kind of art.For putty heating buildings (stove) can apply a variety of different modern materials, but there is a caveat.Typically, such work required for country houses, where to spend a lot of money just do not want to.But you can always turn to the wisdom of the ages and to take advantage of those materials, which can be found in close proximity to the villa construction.

Important!Those materials are to be used for this type of solution, must be free from unwanted impurities.

So what obdelat stove?To do this, you need to prepare a special mud recipe is quite simple:

• 4 bucket soaked the clay;
• 2 bucket of clean sand;
• little water, the amount of which depends on the quality and condition of clay and sand.

How to prepare the solution for putty?

Preparation of such a solution does not require any special tools or skills.It suffices to find a suitable container, such as a tub.Prepared packagings shall have a maximum integrity to the solution of the liquid does not leak.Otherwise, the solution will turn quite dry, that is simply unacceptable for the putty furnace construction.

clay must first be soaked in warm water for 12-24 hours.This will allow more qualitatively mix it with sand.Sand sift before using to get rid of stones and other debris.Both components are filled into containers and then mixed qualitatively.

It is best to mix the clay with sand the old way - stomp your feet.This will not only blend the components, but also to get rid of lumps.During the stirring the mixture may be added to warm water.This is shown by the state of the mixture itself, which should get the homogeneous.The density of the solution should not be less thick cream, which can be found on store shelves.

Preparation of the solution for use

So, how to cover the oven, we understand, but it's worth noting that the finished solution can not be applied immediately.To the final work was the highest quality, you must adhere to the following course of action:

1. qualitatively mix all the components of the solution to the entire container.Doing this is the evening to allow the mixture to brew.
2. Cover the container with a solution of polyethylene film, which does not allow the water to evaporate from the solution.In this state, the solution must be left until the next day.
3. Stir the present mixture in the morning, so that the liquid, which pushed the clay up, was once again a part of the solution.
4. To begin the construction of the furnace putty.

Important!It must be remembered that the finished solution must not crack when dry. Check the quality can be rolled into a palm the ball from the resulting mixture.If such a ball will crack, the solution little liquid.Qualitatively prepared mixture will be held on the stove for a long time and reliably, thus excluding the need for recoat it every year.