Sewerage cleaning their own hands : how

How often should purge

Any blockage is easier to prevent than to remove.Every day in the sewers is discharged not only dirty water, and leftover food, grease, hair and fur, trash.All that is deposited on the pipes, clogging them.

About sewer cleaning do not forget.You can start with the weekly cleansing pipes with the help of hot water and the monthly cleansing with the use of specialized chemicals.

is important not only to deal with blocked tubes, but also time to clean the sewer pit.This can be done as needed, either planned (1-2 times per year).Septic Tank can not only clog over time, but it can accumulate microbial organisms.And to prevent the formation of mold, rot, and infectious diseases, it is necessary to remove this kind of pollution, timely cleaning the well.

Special equipment and means of purification of wells.Cesspool emptier

cesspool emptier - a specialized unit for assenizatorskaya actions, consisting of a tank and a vacuum pump.

Application cesspool emptier for pumping cesspools is the most high-quality and convenient method.You can use it at any time of the year.

cesspool emptier deflate various cesspits, concrete and plastic wells, septic tanks, as well as waste transported evacuated.

is best used for preventive vykachek cesspool emptier of cesspools.

Vacuum cleaning method

Vacuum method of cleaning the well is composed of two parts: the cleaning of sewers, pumping sewage.This is done through a high-power vacuum pump.At the end of the cleaning, the waste is collected and disposed of.This method of pumping complies with environmental services and does not harm the environment.

This method, like the previous one, is effective at the regular scheduled use.

to sewerage system worked without failures and emergencies as well as to adhere to health standards, it is necessary to conduct regular, routine cleaning of septic wells.

hydrodynamic flushing

hydrodynamic flushing of the well is a powerful flushing water pressure, waste and debris from the walls of the cesspool.This allows you to eliminate all kinds of blockages: organic, inorganic.Once the walls are washed, waste is collected and disposed of.

sewer cleaning this method is effective only for periodic use, according to the selected schedule, and not efficacious in emergency situations.It is advisable to choose a hydrodynamic flushing technique only if the drain hole on the wall a lot of mud.

Flushing by chemical means

This method is the use of strong chemicals that dissolve the fat and other dirt, softens and transforms fat.It is very effective and is not responsible for any threat to human, but because of a large amount of washing system required a considerable amount of these substances is not in demand is largely due to the high cost of reagents.

process of washing the well with the help of this method by a specialized unit and the chemical that pre-foamed.Foam handles the surface even under plummet, creating a mechanical effect.

Heat flushing

Thermal cleaning sewage is very similar to the hydrodynamic, but with one difference - water served very hot (160̊ C).As a result, deposits, including fat, dissolved and removed from the well wall.

This is one of the most effective ways to cleanse the professional, but not often applied in practice, since it requires complex technical implementation.

When combined thermal and chemical techniques for washing sewage wells, it is possible to achieve good results already in the first application, several times raising the effectiveness of these funds.

water washing network

If there are thick deposits in the domestic network, to remove the need to act on them mechanically, by means of water jets.For this hole manhole cover stopper and pour water.The resulting head after pulling the plug, cleans clogged.

Manual cleaning

After the cleaning or flushing the drain hole, you need to complete the process by performing manual cleaning.It is able to comprehensively and carefully remove small blockages and deposits.This method is a manual cleansing of the well without the use of automated systems.