Electric Tile - what tool to simplify your work?

Electric Tile - what is it?

This article discusses in detail the above-mentioned points, do not focus on the most processing technology because of how the electric tile cutter, video lessons, there are many, and they all contain the necessary information.Note also that using electric tile cutter, practice working with them is entirely optional, and for the quality of work is enough to strictly observe the instructions.

Tile - a device to change the geometric parameters of different types of ceramic tiles, glass, and stone.This procedure can be performed in various ways.For example, the risk is applied sufficiently deep, in which the material is broken then.In the second case there is a complete sawing it, and the third - with its edge chipping small pieces.

Exactly how will be processing depends on the selected device, which, by the way, and determine the speed of cutting, its quality, and in general the ability to process a particular type of material.

Tile cutting machine: practice with other tools - a useful tool

Existing types of Tile allows the following operations:

• bringing the workpiece to the desired size;
• formation of holes;
• straight and curly processing;
• creating depressions;
• saw cut at an angle of 45 degrees.

Without these possibilities of such a tool would be extremely difficult to put trim around the pipes, air vents, switches and sockets, as well as in the corners of the room - both internal and speakers.However, not every device is so versatile that have the ability to perform all of these functions.

Mechanical Tile does not require a power supply, and all work is carried out at the expense of muscular effort of man.They usually can be processed to the material thickness of 15 mm.These devices consist of a table, arm, carriage, cutter and roller presser foot.If they are equipped with a circular cutter, then they can make holes for switches, pipes, etc.

Hand Tile found two types.First resembles pliers and is used for receiving and processing shaped recesses in a workpiece to 8 mm thick.The second is a separate roller and intended for direct and for curly cuts.

Tile electric professional and not only - what to choose?

Finally, the electrical machines of interest to us.Say at once that the devices are designed to work with blanks over 100 mm are classified as professional electrical and tile cutter in this article are not considered.

all other equipment in this class is designed to handle material thicknesses greater than 15 mm.They may perform cuts at 45 degrees, to bring the size of the desired condition.Due to the fact that the blank is sawn through the thickness, obtained by section with rounded edges and completely removed in the marriage.

Compared with previous forms of Tile significantly increases the speed of the work.Due to the high speed of rotation of the saw head with a diamond disc inevitable overheating of the cutting tool, which is used to cool the special liquid.

Tile cutting machine with water cooling is available in two types: the upper-engined (rail) and lower.In the first case, the engine layout ensures a more comfortable and accurate cutting, and the second type of machine allows you to work with workpieces of all sizes.To summarize, we can state that the electric machine is indispensable when laying the tile thickness of 15 mm, and to work with the material is less than the specified thickness is more acceptable mechanical machine.