Stand to drill or drill press to make your own ?

Description simplest home-made machine for drilling

Homemade drilling machine from the drill does not have to have a complicated structure and require large financial costs.It is necessary to understand the operation of the element, and its production does not seem so difficult.For example, imagine a solid vertical rack which is fixed to a wooden stand.On the front there are two simple guides, which carries out its movement bar fixed to the shoe.

The block is made in such a way that it could be attached drill body.According to this principle even in the 70's first self-made drilling machine of a manual drill was made.

Important!In the manufacture of components for such a bed must be checked several times the size of the material and blanks.

In order to work on such a bed was the most comfortable, the upright should be equipped with strong spring, which will raise the drill after the end of the process.

Stand for drills: some useful stuff?

For the manufacture of the bed will need some materials, to find that was not difficult.So, we need:

• To produce stand furniture board with a thickness of not less than 20 mm;
• Centimeter plywood and wooden beams 90h55 mm;
• band steel, the size of which is 250h40h2 mm;
• screws and screws for fastening of all elements of the machine.

Once all required materials will be prepared, you can start gathering the necessary tools, without which produce such a machine will not work.This drilling machine of the drilling can be performed without the use of special tools.a hacksaw is required for the manufacture of the frame, a ruler, a pencil and a drill.

Important!In preparing the elements of the framework, be extremely precise and careful in order not to have to redo all the work.

Procedure for the manufacture of home-made machine

So the machine for fixing the drill made in the following order:

1. handle basic frame, on which the entire machine will be assigned.You can use the work surface of the kitchen furniture.Prepare a vertical rack of centimeter plywood, securing its corners cut from thinner material.
2. Collect metal rails, which will move the slider to the drill.Sam slider is made of a piece of wood, which we have prepared in advance.
3. With steel adjustable clamp made of durable holder for the drill casing.Between the holder and slider have to perform special holes and abutments for the spring, which will raise the slider.
4. After assembling the machine, check its performance, which will correct minor errors and shortcomings.

Important!Before connecting the drill to the mains check the mounting tool to the cartridge from being trapped. On this improvised assembly machine for drilling can be considered as over.In order not to injure yourself on the sharp edges of the wooden frame, it must be treated with sandpaper or a file.