Warming houses of foam blocks : options , technologies , opportunities

Wall insulation foam block from the outside and the inside: options and opportunities

choice of technology insulation technology is recommended, depending on the characteristics of structures in question.In particular, experts are often carried out inside the warming bath, but the houses built of the same material, prefer to insulate the outside, because due to this you can effectively save space premises.

Produced house warming of the foam block from the outside, usually with the help of special tile materials.The most common of these is easy and practical foam.And to carry out house warming of the foam blocks on the outside it is expedient in several stages:

• preparation of surfaces to be treated;
• laying insulation material;
• leveling and treatment of joints;
• plastering and selected decorative coating.

As you can see, is the wall insulation is a fairly simple task, which is able to cope with even the layman.However, the approach to the organization of the process it is important to responsibly without saving on materials used and performing all the work slowly and conscientiously.After all, how much insulation foam block was correctly done without, is not only the comfort of the finished structures, but also the degree of protection of its walls from negative external influences.

As mentioned above, the insulation of the walls of the foam block can be carried out from the inside.The technology of thermal insulation in modern society is less common, but still and it deserves your attention.

Warming bath of foam block or apartment building with

inner side Often consumers are willing to insulate the house from the foam on the inside, using a special glass wool or other modern insulation materials.This option, of course, has a right to exist, but it is important to remember that the warming bath of foam blocks (or even an apartment house) must necessarily involve the organization of a vapor barrier.A layer of vapor barrier material only cover a layer of insulation material - otherwise, it can penetrate into the moisture, which will cause the development of micro-organisms and fungi, as well as the failure of the entire system.

In addition, it is very important to teploizolirovanie Foam concrete walls from the inside or the outside was carried out at a sufficiently high level of quality.You must choose the right insulation material properly prepare the surface, put it to close up joints.Only subject to these requirements insulation of residential houses, cottages, bathhouses, or warming of the loggia of the foam blocks can give the expected result.

In conclusion

From all the above it is clear that the outer insulation of the house of foam blocks has certain advantages over the inner.However, no matter what technology you preferred, you must make sure that all the work in the organization of the process was carried out correctly, competently and in compliance with safety regulations.