Laying laminate your videos hands

before laying laminate flooring must be leveled, for instance, make a tie.Screed under the laminate floor may have gaps no more than 3 mm, paving the two-meter rack.unevenness in the floor under the rack depth of more than 3 mm need to be polished or putty.

Tools and Materials for laying laminate:

- Polyethylene film (0.2mm acts as a vapor barrier);
- fake soundproof layer (substrate thickness of 2 mm);
- wedges;
- Saw (better and more convenient to use a jigsaw);
- Pencil, ruler;
- glue for fixing the laminate pieces in the heating pipes (at the castle connecting method);
- Hammer;
- Wooden block (use a piece of fashionable cropped laminate boards);
- Clamping rod.

required amount is calculated based on the fact that in one carton laminate planks 2 m.Following the acquisition of the material should be left in the room in the boxes a day - two to the panel used to the new temperature conditions.

When the device laminate flooring indoor temperature should not be below 18 degrees.Substrate temperature - not less than 15.And not more than 70% relative humidity in the room.You can not be nailed or glued laminate, t. To. This "floating" floor.

laminate stacking technology with video

The floor stretches polyethylene film with overlapping strips at least 200 mm.The film should go on the walls.Then decomposed noise-insulated substrate.Layout Direction (rolling) must coincide with the direction of laying laminate panels.If the length and width of the room more than 8 m when laying the floor it is necessary to leave expansion joints measuring approximately 2 cm.

Immediately prior to laying laminate on the floor with your hands, you need to calculate the width of the final row of panels, it should not be less than 50 mm.If this does not work, then cut and the first panel width.The distance between the first and the last panel of the wall should be in the range 10 mm - 15 mm.To fix the distance from the wall to the thickness of the panel used the fixed wedges (you can use a little trimming of laminate).Wedges 2 pieces fit.One panel.After the installation of the floor wedges are removed.The gaps are closed plinth.Skirting boards are fixed to the wall with dowels or plugs.

Widget from SocialMart

Install panel must be in strict sequence, with each successive even-number starts with half panel, so reliable bonded panels and the floor is less than the "walk".Laminated panels are connected comb into the groove.Customized panel using a block of wood and a hammer.Near heating pipes bonded laminate.

Laying laminate with his hands video

Now look unusual laminate stacking technology from the experts "SuperStroy".

We have already talked in detail how the laminate stacking technology with their own hands with the video instructions and detailed description of the process, be sure to check this article.And now another video, where professionals got down to business.

Now video instruction from specialists of the popular program "Repair School", they give practical advice and recommendations on laying laminate flooring in the home, look.

For dessert, do look like our foreign colleagues, have much to learn and take note.It will be interesting to watch this video without the knowledge of the English language.

Link to site repair of apartments with their own hands is obligatory.

Author Kurochkin Svetlana