Bark plaster coating technology with video

All the rules for applying bark

First, let's define what we are not talking about the bark beetle, which is an insect and eats your floors, and a special textured plaster.Basically, this plaster is applied to the facades, and the least likely indoors.But before you start to use this compound in its intended purpose, it is necessary to get acquainted with the application of the rules of composition.In principle, nothing complicated technology and plastering pitted simple, but still know some nuances worth, and even better to see the video tutorial, which you will find below the article on the site repair of an apartment on their own.The work itself consists of several stages:

1. Primer.
2. Application to the surface of the bark beetle.
3. Grout bark.

In order to learn how to apply this textured plaster, you can workout at the rear wall of the facade of your home, using a few bags of bark.

To work with this mixture is best to choose autumn or spring.You can do this in the summer, but it's worth knowing that the plaster will dry up quickly, so you will need to work quickly.So in order to learn the best, of course, choose a neutral season, ie spring or autumn.

But before you get started, you need to prepare the necessary tools for the correct application of plaster woodworm:

1. Foot Bath and roll that will be needed for priming.
2. Drill with a whisk.
3. Bucket.
4. Shoulder and trowel for plastering.
5. bryzgalki.
6. Grater.It is advisable to plastic.

Now proceed directly to work. first , you need to do - is primed your wall .See our article how to choose a primer, primer species.To do this, you must use a special dye-primer.Choose the ground white.All this is necessary to ensure that black wall color in the furrows are not translucent.If you have chosen an expensive dye-primer, they can walk on the wall, all once, as it has a very thick consistency and high quality.If your soil from cheaper, then put it on the wall in several layers.All this is because the cheap soil more fluid and in order to achieve the desired result, you need to put on the wall about two or three layers, that is, until it is time, as long as your wall will not get a uniform white color.After you are dealt a primer, you should wait until it has dried, otherwise you risk to rub it to black during the bark beetle.

Widget from SocialMart

plaster coating technology pitted

next stage - drawing bark .To do this, knead the plaster in the bag, as specified on the bag you choose bark.But it is worth remembering that it is not necessary to mix too much, as you can not have time to work out all the stuff, and he simply withered.Apply bark beetle should be made of stainless steel spatula.Do everything carefully, even layer.Remember that the layer thickness should be in the fraction size of your bags of plaster.A very important advice is for you to become what is applied plaster rows horizontally or vertically.During the application of a number should capture the entire height or thickness of the wall, then the result will be even and neat.

If your wall is too high or wide, then it is necessary to limit in advance the extent to which you can get, and just gently apply the plaster, but on the target area.This means that the wall is divided in half by using masking tape and the first to reach him, and the next day, having broken it, and pasted on the treated part, apply just pitted for the second half of the wall.

Once you are dealt a bark beetle, it is necessary to wait ten or twenty minutes, so that the plaster sets.It all depends on the weather, the warmer, the faster it will start to grasp.In principle, you can check this by using pre-prepared plastic grater.If the plaster it will not stick, then you can safely proceed to the next stage of work, that is to grout the bark beetle.

grouting technology bark is simple and is done using the same plastic trowel.To do this, you must define the pattern, if you want to see the "rain", it should be floated vertically - up or down.If you like drawing "lamb" while doing a circular motion.Once you overwrite the first row, you should immediately begin to spray the second row, and the joints between the rows need to sprinkle water not to be visible transitions.The video below is clearly demonstrated.

If this happened, you do not have time to wipe and pitted plaster has dried, then use bryzgalki and missing picture can be to finish with nails.

As for painting, the paint pitted the best roller or brush in the furrows, and at least two sloev.Uznat much plaster will need help online calculator amount of plaster.

pitted plaster Application video